Results 1 to 5 of 5

Thread: Another Guy With A Logo Problem

  1. #1
    Goldmember robpauza's Avatar
    Join Date
    Feb 2003
    Location
    Chattanooga, TN
    Posts
    124

    Question Another Guy With A Logo Problem

    Hello,

    This is one of the few non-subpatch models I've done. It's sort of a logo/emblem thing to be used on a series of posters and ads.

    I can't seem to figure out what's going wrong. Any help would be most welcome. Here's what's going on:


    I've also uploaded the model if anyone want's to take a look.
    Click here for Model

    Thank you,
    -Rob

  2. #2
    imho

    pull the smoothing angle down to about 20 degrees (or even lower).
    that way you won't have these smoothing errors

  3. #3
    Goldmember robpauza's Avatar
    Join Date
    Feb 2003
    Location
    Chattanooga, TN
    Posts
    124
    Bytehawk:

    Thanks a ton!!! This is a rush project, and you saved my butt.

    Next I get to surface it, then design a few posters and newspaper ads to go with it.

    Thanks again.
    -Rob

  4. #4
    Goldmember robpauza's Avatar
    Join Date
    Feb 2003
    Location
    Chattanooga, TN
    Posts
    124
    Here it is by the way: (no surfacing yet)

    -Rob
    Attached Images Attached Images

  5. #5
    that's a kewl logo

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •