Results 1 to 3 of 3

Thread: DSK On/Off State

  1. #1
    Registered User
    Join Date
    Nov 2016
    South Dakota

    DSK On/Off State

    As far as I can tell there isn't a way to set a DSK state to on/off without just using take/auto. I'd like to be able to create a macro that will turn a DSK off if it's on, rather than just a toggle.

    If there is a way, please let me know! Mainly looking to create a "go to replay" button that will remove all DSKs.

  2. #2
    Yes, the TAKE and AUTO options are just a toggle.

    You can do want you want with the 'value' command.

    The shortcut would be for the main switcher bus:

    if you want a different dsk, just enter the correct dsk number (dsk2, dsk3, dsk4)

    if you want to control the keyer in M/E 1 it would be:

    if you want a different M/E than 1, just enter a different 'v' number (v2, v3, etc...)

    in any of the above cases you use a value or 0 to 1 (0 = off, 1 = on).
    Kane Peterson
    Key Accounts Sales Engineer
    NewTek, Inc.

  3. #3
    Macro Titan JonRaidel's Avatar
    Join Date
    Sep 2009
    Los Angeles, CA
    all of these are correct commands that i use daily. was fun to get them implemented !
    Gear Used:
    TCXD 8000
    3Play 4800
    VizRT IP 2-Channel
    Panasonic HDX 900 Cameras
    NDI Connect Pro
    Graphic Outfitters ScoreHD
    Graphic Outfitters Scorebridge
    Livetext 3 w/ LT [Scoreboards 2]


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts