Results 1 to 1 of 1

Thread: TRANSITIONS: Local Layer Controls

  1. #1
    Moderator
    Join Date
    Mar 2003
    Location
    earth
    Posts
    203

    TRANSITIONS: Local Layer Controls

    PROBLEM DESCRIPTION

    Building on the knowledge of how video layers work in the TriCaster the following discusses the use of the Local Layer Controls.

    SOLUTION AND WORKAROUND

    These tools provide control and configuration options individually for three of the primary video layers – BKGD, DSK 1 and DSK 2. Source menus are located next to the Take buttons for each DSK layer.

    Click image for larger version. 

Name:	transitionslocallayercontrols.png 
Views:	132 
Size:	17.9 KB 
ID:	124556

    Pressing the local Take button for either DSK 1 or DSK 2 displays or hides the corresponding video layer (shown on top of the BKGD layer). The local Auto button for each layer perform similarly, but use the transition settings configured at the right for each layer to accomplish the operation. You can halt an incomplete transition by clicking Auto again. For BKGD transitions, the Auto will be completed the next time you click the button. Re-initiating an incomplete DSK transition that is past its midway point completes it; otherwise it is reversed.

    Transition bins for each layer allow you to pre-select the effect that will be performed next ( the active transition is displayed with a gold border). The left-most effect is always Fade. Pressing the local Take button for either DSK 1 or DSK 2 displays or hides the corresponding video layer (shown on top of the BKGD layer).

    The local Auto buttons for each layer perform similarly, but use the transition settings configured at right for each layer to accomplish the operation. You can halt an incomplete transition by clicking Auto again. For BKGD transitions, the Auto will be completed the next time you click the button. Re-initiating an incomplete DSK transition that is past its midway point completes it; otherwise it is reversed. Transition bins for each layer allow you to pre-select the effect that will be performed next (the active transition is displayed with a gold border). The left-most effect is always Fade.
    Last edited by shepherd; 09-29-2014 at 02:04 PM.
    NewTek Customer Support

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •