Results 1 to 2 of 2

Thread: Contect Panasonic ptz to tc1

  1. #1
    Registered User
    Join Date
    Sep 2017
    Location
    Australia
    Posts
    7

    Contect Panasonic ptz to tc1

    Before I go ahead I just wanted to check I had this right.

    Do I make the Panasonic AW-UE70 camera IP address the same as the TC-1's address?

    I have it working with the Auto tracking software, so I'm guessing after I do that I'll need to update the IP address to connect again with this software.

    I'm not network savvy so I'm just fumbling my way through this.
    Thanks

  2. #2
    Registered User
    Join Date
    Jun 2006
    Location
    Chicago, IL
    Posts
    617
    No, every device must have a unique IP address on the network. As an example, if your TriCaster is 192.168.0.10, you could make the camera 192.168.0.11 if that's not already in use. All other network parameters would be the same though (net mask , gateway, DNS, etc). The key is first, second and third octets must be the same. The final digits are unique to the device on that network segment.

    Fritz Golman
    Museum of Broadcast Communications

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •