Results 1 to 5 of 5

Thread: Weird PTZ1 lockup issue

  1. #1
    Registered User
    Join Date
    May 2011
    Location
    Bismarck, ND
    Posts
    13

    Weird PTZ1 lockup issue

    Hi! I have a dozen PTZ1 cameras, and have an issue that didn't appear to be discussed here yet (I looked through all the threads so I don't duplicate).

    The video from the camera freezes after a period of time - we're talking an hour or more typically - and I have to power cycle the camera to get it back. It isn't just the NDI feed; it's the HDMI out as well. The motor controls work just fine using the IR remote, and I can turn the camera off. But I can't turn it back on - it just stays in standby unless I power cycle it.

    • It behaves the same whether connected to a network or not;
    • It behaves the same whether powered by PoE+ or the included 12v supply;
    • It freezes on all outputs (NDI + HDMI), as mentioned above;
    • It behaved the same with software VHR118 and VHR120p (I just updated in hopes of a fix).


    I figured it was something with my network, my switch, or even my 460. I took it from one studio to another and swapped it out with a different camera, on a different network, connected to a TC1. Same thing. Now I have it on the bench, connected to a display by HDMI and powered by 12v, and am watching it do it again.

    It seems like a random interval...in fact, it survived overnight last night and was working when I came in this morning. Unfortunately it froze shortly thereafter.

    Have any of you seen this, or know of a fix? Unfortunately firmware didn't cut it.

    Thanks!

  2. #2
    'the write stuff' SBowie's Avatar
    Join Date
    Feb 2003
    Location
    The stars at night are big and bright
    Posts
    19,649
    And they all (or many of them) do this? Have you written a bug case? If not, and particularly if they do this when not connected to a network, please do so.
    --
    Regards, Steve
    Forum Moderator
    ("You've got to ask yourself one question ... 'Do I feel lucky?' Well, do ya, spammer?")

  3. #3
    If it is also happening on the HDMI/SDI output, I doubt it is the network. Does this happen on all of the cameras you have or just specific units? What if you only connect a camera via HDMI output only?
    Kane Peterson
    Solutions Architect
    NewTek, Inc.

  4. #4
    Registered User
    Join Date
    May 2011
    Location
    Bismarck, ND
    Posts
    13
    Thanks, guys. This happens with just the one camera. I have six in my big training room, four in my studio, and three in my remote gear. This one particular camera is in my remote gear.

    As stated above, it happens on NDI and physical outputs. With or without network connectivity. PoE or 12v.

    Clint

  5. #5
    I'd contact support. If it is just this single camera, there has to be something wrong with it. PTZ1 cameras have a two year warranty.
    Kane Peterson
    Solutions Architect
    NewTek, Inc.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •