Results 1 to 5 of 5

Thread: TalkShow VS4000

  1. #1
    Registered User
    Join Date
    Aug 2009
    Location
    Carriere, MS
    Posts
    500

    TalkShow VS4000

    I have noticed that there are 2 Network ports on the back. Do I need to connect both or will 1 connection work.

  2. #2
    One port is all that is required, NDI will take advantage of both if they are connected. If you are using Dante, you might have a separate network for that, you can use one port for Dante and the other for Skype.
    Kane Peterson
    Solutions Architect
    NewTek, Inc.

  3. #3
    Registered User
    Join Date
    Aug 2009
    Location
    Carriere, MS
    Posts
    500
    Great thanks Kane

  4. #4
    Registered User
    Join Date
    Nov 2019
    Location
    Long Beach
    Posts
    2
    I have only 1 channel of Skype audio coming through to my Yamaha QL1 Dante's 1-2. When I use Talkshow CH2 Skype, the audio comes through Dante 1-2 as well. Should I be able to get 4 distinct LR channels of audio coming from each channel of Skype through Dante's 1-8

    I have the Dante patching into the QL1 as follows:
    Dante 1-2 Skype Ch1 LR
    Dante 3-4 Skype Ch2 LR
    Dante 5-6 Skype Ch3 LR
    Dante 7-8 Skype Ch4 LR

    I do have mix minus working with Dante 1-4 into the Talkshow. This is the routing from the QL1 into the Talkshow
    Dante 1: QL1 Mix 1
    Dante 2: QL1 Mix 2
    Dante 3: QL1 Mix 3
    Dante 4: QL1 Mix 4

  5. #5
    Registered User rpacker's Avatar
    Join Date
    May 2020
    Location
    Washington, DC
    Posts
    1
    Do you have control over where you situate each of the feeds on your interface, or do they have to be displayed in a grid?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •