Lightwave 3D - Tutorial Videos

[iolus]

Selam;
Lightwave 3D ile uzun zamandır hobi olarak ilgileniyorum ve bildiğim öğrendiğim şeyleri paylaşmaya karar verdim.
İçerik türkçe olacak ama tüm arkadaşların anlaması için elimden geleni yapacağım.
Umarım yararlı bir seri olur (Tüm videoları buradan izleyebilirsiniz.)

Saygılarımla;

Hi;
I've been interested in Lightwave 3D for a long time as a hobby and decided to share what I know and learned.
Content will be Turkish, but I will try my best to make sure all friends understand.
I hope it's a useful series. (You can watch all the videos here.)

Sincerely;

Creating terrain - Way #1 https://youtu.be/jbylL6xVdGA	Making spiral staircase steps - Way #1 https://youtu.be/gRowMguk0G8	Subpatch level https://youtu.be/PmwB0z_160I
Creating terrain - Way #2 https://youtu.be/MWJ74GgxNFY	Making spiral staircase steps - Way #2 https://youtu.be/PRLNpzMT1I8	Wire modeling https://youtu.be/GZPSIOtvcK0
Creating terrain - Way #3 https://youtu.be/4xZ5-Ftr7WA	Making spiral staircase steps - Way #3 (Same as Way #1) https://youtu.be/gg0vW0dhUcM	Edge slicing for hard surface https://youtu.be/hggiPXTOgYc
Creating terrain - Way #4 https://youtu.be/xgSwhDiZJvU	Making spiral staircase steps - Way #4 https://youtu.be/3GUsWZRTZ98	Sphere with square polygons https://youtu.be/SpnhaAvm1M0
Creating terrain - Way #5 https://youtu.be/90HtTxBGvXE		Making wizard hat https://youtu.be/0dRFL14Xi_Q
Creating terrain - Way #6 https://youtu.be/JBO_ODEfORU		Making a nerve cell https://youtu.be/-MDMAi72d6k
		The idea of ​​making a tire simply https://youtu.be/g5NLy5ZiTGI
		Selecting surfaces facing the same direction https://youtu.be/GpD4FPyhYqM
		Simply the idea of making an auger https://youtu.be/3LgKmX2V-yk
		Edge Walk https://youtu.be/UZWPwE1hQ4o

[JohnMarchant]

Some gems in there Yunuz

[iolus]

Some gems in there Yunuz

Thank you

[Tim Parsons]

Very nice!

[fishhead]

Nice and clean. :-) Thanks

[iolus]

Very nice!

Thank you

- - - Updated - - -

Nice and clean. :-) Thanks

Thank you

[iolus]

3D pastry cream modeling
https://youtu.be/1ns_k6-56Pw

[iolus]

Barrel boards
https://youtu.be/hp0kjyRy94w

[iolus]

Making DNA with metaedges
https://youtu.be/EdBNz5K3TB8

[iolus]

Creating terrain - Way #7
https://youtu.be/A_WfoxU72WA

[iolus]

Retaining wall for 'Smooth Shift'
https://youtu.be/5KNd2CNm_pA

[iolus]

Pinwheel modeling
https://youtu.be/LctrDAKQaV4

[MarcusM]

Cool tutorials. It would be good if you will show all the time numeric window in videos. It will help new users to see additional options tools have and in general it will be more clear.

[JohnMarchant]

Indeed Marcus is right, if English is not your native language or you dont want to do an audio track then its important to slow down and make sure every keypress and menu is shown. I like the fact you have the mouse graphic on your videos.

[iolus]

Cool tutorials. It would be good if you will show all the time numeric window in videos. It will help new users to see additional options tools have and in general it will be more clear.

Indeed Marcus is right, if English is not your native language or you dont want to do an audio track then its important to slow down and make sure every keypress and menu is shown. I like the fact you have the mouse graphic on your videos.

Thank you very much for your advice, I will try to be more careful.