Results 1 to 3 of 3

Thread: Audio Seperation

  1. #1
    Registered User
    Join Date
    Dec 2015
    Location
    Green Bay, WI
    Posts
    18

    Audio Seperation

    My current setup is 1080i SDI inputs and I use input 1 of the analog XLR inputs on my 4800. I currently Split Play by play and NAT sounds between the Left and Right Channels.

    Ideally if possible I would like to record play-by-play on Left and Right (Audio 1,2) Then on Audio 3, 4 I would like to record NAT sounds and In-House PA. Is this something that is possible?

  2. #2
    Registered User
    Join Date
    Sep 2018
    Location
    Perth, Australia
    Posts
    8
    Hey Jbins07,

    Did you manage to figure out a solution?

    I have a similar issue.. i have the 440, with SDI inputs and Nat sound from cameras, however i also want to bring in commentary track via XLR inputs. is there a way to input commentary track and Nat sound at the same time into clip list / playlist

  3. #3
    You can only choose one audio type for an input, either embedded SDI or analog.
    Kane Peterson
    Solutions Architect
    NewTek, Inc.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •