Search:

I think you need Advanced Edition to get router support on the 460 system.

Each network port will operate in it's own IP range. You can put a switch one of the direct connect NDI ports and connect all of the cameras to that. The PTZUHD camera use H.264/H.265 compression,...

The NewTek PTZ cameras do operate with VISCA protocol, either via serial or IP. It's not officially supported (you can't call support for assistance on this as NewTek supports control via NDI), but...

The TriCaster interface is designed around a 16x9 1920x1080 (or 16x10 1920x1200) resolution display. Using higher resolutions uses more GPU resources that could cause issues. Because of this,...

You can already do this with TriCaster systems that have NDI-KVM support.

On the audio output (Master, Aux) that you want on the Interface/Multiview NDI stream you can use the Supplemental Output...

TriCaster 2 Elite and VMC1 systems support DDR's and Buffers as direct NDI outputs. The TC1 does not.

If the LivePanel password is active on then system (it typically is by default), then your http command need use Digest authentication to be accepted. You can disable the password requirement in the...

The TriCaster is a real-time processing application, installing security software often has the opposite effect.

Can the system be set onto is own network, so it isn't directly on the corporate...

I'd start with a new session. If that is reliable, then it would point to something in the session (bad clip in media player or some other type of session corruption).

Also you don't mention what...

The Minrray cameras are NDI-HX encoding (H.264 or H.265). The Spark Plus IO 4K decodes high bandwidth NDI (SpeedHQ).

High level TriCaster systems do support 24fps formats. The Mini level products have not support these frame rates.

This is something that NewTek Professional Services can help. There is a macro extension that can be added to the system which allows you send commands to the KiPro, you can make it record, stop,...

Dante Virtual Sound Card is what you install on the TriCaster, not Dante Via.

Only the 2S and 4S panels (and TW850) will operate on the TriCaster 2 Elite. Other panels will not 'light up' when connected.

The EULA should appear the first time you open the web interface on the Spark units. If it doesn't appear, not big deal. I'd also make sure your Spark units are updated to the latest firmware. ...

There is a VHR121F firmware available, I'd make sure you are updated with that to start with.

Beyond that, I'd contact support to verify that the camera is out of warranty. If the output of the...

It's not fully powered 'off', but really in a standby mode. The web interface is still active. In fact, there is a video feed from the camera, but it is black with text that says the camera is...

You could use PowerPoint with a DSK or do a double box effect in a M/E, where you have the video on side and the PowerPoint on the other.

Another possible solution is to look at something like...

NewTek Professional Services can help with this. It is possible to make the TriCaster execute external command line tools, I've used this capability to control other devices that use Telnet, TCP,...

This is one option. You can also use the web UI to access the power function or the remote control.

It is not the Window's username and password, but that of LivePanel, which is 'admin' for both by default. You can change the password (or disable it completely) in the Administration Mode panel on...

I've not tested to see what a Mini 4K system would be end to end in this setup.

My experience has been that the Spark Plus units are as fast as SDI when it comes to input, BUT on systems with...

VLC doesn't support NDI as an input (there is the NDI plug-in to give it NDI output). If you need to watch a NDI signal, use NDI Studio Monitor.

The version of Windows 10 on these products is the Long Term Service Branch (LTSB) version and has a 10 years of support from Microsoft....

I'd also make in in Windows, that your microphone default format is set to a '16-bit, 48000Hz (DVD Quality)' selection (if possible), most Window audio devices default to 44100Hz (CD Quality) and...