PDA

View Full Version : Core Update problem



Raśl
07-30-2003, 02:54 AM
Hi,

we have a board that cannot be update to the new core. You run the update, it start to write the core (or it seems to do that) and then the machine has the same core as it has. It's normal? could be the board doesn't show the new core version number? it has the old stability problems, but other machines has not the same problem when we update it.

Thanks

Michael Englyst
07-31-2003, 03:51 AM
Hi Raśl.

The only thing I would suggest is to remember to shut down the PC completely for at least a minute after doing the core update, and then turn on the machine again. Maybe even pull the power plug from the machine for the 1 minute. Restarting will not 'fix' the new core on the Toaster board.

Hope this helps.

Raśl
07-31-2003, 04:18 AM
Hi,

Thanks for your try. I did it, but the core doesn't update... i start thinking it's going to be a hardware problem. I'll do the core update an other time and i'll try to plug off during 5 minutes... i hope it could be a solution, but i don't think so.

Thanks an other time