PDA

View Full Version : iVGA overlay transitions



04-12-2008, 01:18 PM
As the Studio currently works, the iVGA overlay is effectively downstream of the program ( live) bus. This works fine for the most part, but if you are internally recording and/or sending the "live" output to an external device, it requires that you make sure that you transition to iVGA on the live feed if you are recording or sending the Standard def. feed to an external device or location.

Is it possible to "tie" or "arm" the transition of the iVGA overlay to the preview bus of the switcher so that as you transition from iVGA in preview to iVGA program you apply the iVGA Overlay at the same time, sychronizing the two and saving an additional step?

This would also be a nice feature to have available on the Video Mixer.

Thanks ! Comments?

jcupp
04-13-2008, 10:13 AM
This sounds like a job for a custom keyboard command. I'm in Vegas for NAB right now but I'll try to remember to take a look at this when I get back