PDA

View Full Version : Thanks for all the fish



Kurtis
08-01-2007, 01:13 PM
I've been an active member of this forum for a number of years now and have developed relationships with many of you. Therefore, I want to let you know that my last day at NewTek will be Friday. My time and experience here at NewTek has resulted in new opportunities for me to pursue. It wasn't an easy decision as I have been in the 3D industry for almost eleven years and with NewTek over four. Working at NewTek and with its amazing community of customers has definitely been a great experience that I will never forget. I want to take this opportunity to say goodbye and thank you to so many of you that have shown me so much support in this position and in this industry over the years. I wish you all the best of luck.

Jay, Chuck, Marvin and the rest of the LightWave crew continue to monitor the forums, you'll see posts from them. And, of course, if you need any other assistance from NewTek, you can always use the following contact information:

You can register NewTek products online at http://register.newtek.com.
You can buy NewTek products online at http://shop.newtek.com.

Customer Service is available Monday-Friday from 9:30am-5:30pm CST at 1-800-862-7837 or [email protected]
Technical Support is available Monday-Friday from 9:30am-5:30pm CST at 1-210-341-8444 or [email protected]
Sales is available Monday-Friday from 9:00am-6:00pm CST at 1-800-847-6111 or [email protected]

Lightwolf
08-01-2007, 01:43 PM
Hey, this is the NT forum, have a :chicken: or at least a :cat:

Sad to see you go.... I wish you all the best for you future endevours, what- and wherever they may be.

Cheers,
Mike

iconoclasty
08-01-2007, 01:46 PM
It has been an honor foruming with you sir.

Phil
08-01-2007, 01:56 PM
So what are you up to / where are you off to? Curious minds want to know as renders tie up perfectly good gaming machines :D

Tzan
08-01-2007, 02:00 PM
I think you've done a great job here.
Good luck out there :)

hazmat777
08-01-2007, 02:03 PM
Thanks for all your efforts Kurtis! You will be missed. 8~ Good luck!

Darth Mole
08-01-2007, 03:53 PM
Congratulations - I wish you success in whatever it is you do next!

Glad the fish arrived okay.

nemac4
08-01-2007, 04:21 PM
Best of luck to you Kurtis!:thumbsup:

Dodgy
08-01-2007, 04:32 PM
Good luck Kurtis, you'll be much missed!

Titus
08-01-2007, 04:40 PM
Good luck Kurtis. I think we'll not see you @ siiggraph then.

Chuck
08-01-2007, 04:50 PM
Thanks for being a great co-worker, and know that you'll be missed. Good fortune be yours in all your future endeavors! :)

Wickster
08-01-2007, 05:01 PM
NOOOOO!!! Kurtis no!!! KUUUURRRTTTIIIISSS!!!

It was an honor to have talked to you here on this forum. Good Luck Sir Darth Kurtis. You will be missed.

theo
08-01-2007, 05:04 PM
Wishing you one of those really shiny futures with lots of really cool specular highlights on it. Have a blast wherever your toes wiggle, Kurtis, and don't forget to freeze your Newtek tears in a baggy.

Kurtis
08-01-2007, 05:16 PM
Thank you all for your comments.

For those of you who asked...

No, you won't be seeing me at SIGGRAPH this year, but I have to admit I'm looking forward to being just an observer the next time I am able to attend one. You'd be amazed at how little you get to see when you're "working" a show. :hey:

I've spent a big part of my career working in the instructional design field. I've even taught at two different community colleges. I'm taking an opportunity to return to that area, which I've always enjoyed.

JohnMarchant
08-01-2007, 05:32 PM
Take Care Mate, Hope your next venture is successful, come and pop by every now and again to say hello if you can.

Silkrooster
08-01-2007, 05:35 PM
Kurtis,
I wish you luck on your new career, you will be missed. Hopefully you will get a chance to pop in from time to time just to say hi.
Take care,
Silk

zapper1998
08-01-2007, 05:38 PM
U will be Totally Missed... snif.. snif..

Sad to see U go..

May your future days bring joyious, properious memories..

U will not be forgotten...


Michael

GregMalick
08-01-2007, 06:02 PM
Wow - this just somehow feels very sad. :(

We will miss you.

All the best wishes.....

WilliamVaughan
08-01-2007, 07:28 PM
Good luck with whats to come!:thumbsup:

Matt
08-01-2007, 07:52 PM
Take it easy dude! We'll all miss ya!

JamesCurtis
08-01-2007, 08:06 PM
Yeah, best wishes for whatever your future endevours may be. You've helped many of us [even me most likely] at one time or another. Take care!!

T-Light
08-01-2007, 09:07 PM
Oh d*mn and b*gger. Very sorry to hear this, Goodbye old man.

http://www.dare.me.uk/images/darth-kurtis.jpg

To the the funeral strings of the John Williams ROTJ orchestra, all the best, you will be missed, I wish you well :) :thumbsup:

:cry:

Steamthrower
08-01-2007, 09:34 PM
Tschuss, ciao, bye...

...won't be seeing the M&M anymore...

BazC
08-02-2007, 01:25 AM
Sad to see you go but all the best for the future!

mattclary
08-02-2007, 05:44 AM
We'll miss you, man!



Sooooo... Ummmm.... Who should I send my resume to? ;)

flakester
08-02-2007, 05:50 AM
Good luck, godspeed, and the best wishes of future fortune to you Dude.

Kuzey
08-02-2007, 06:25 AM
Does that mean you are going to be teaching along side Proton...that could be a dangerous combination :D :D

All the best with the new surroundings :thumbsup:

Kuzey

iconoclasty
08-02-2007, 08:08 AM
Even if you're not working at NT you'll still be a member of the LW community, you can still participate on the forums. Right?

Kurtis
08-02-2007, 08:29 AM
Once again, thank you all for your comments.

Kuzey, nope, William's safe from me. I'll be helping to develop training materials for a large company that has nothing to do with 3D or graphics.

iconoclasty, I'll probably stop by from time to time, but it won't be in an official capacity, and it may be with a different account to avoid confusion for customers.

Kuzey
08-02-2007, 08:54 AM
I'll be helping to develop training materials for a large company that has nothing to do with 3D or graphics.


Ahh.... Microsoft, they need all the help they can get :hey:

Just make sure you find the time to have some fun :thumbsup:

kuzey

Nigel Baker
08-02-2007, 10:17 AM
Hello Kurtis,

All the best where ever you go and thanks for all the help along the way.

Regards,
Nigel.

alifx
08-02-2007, 11:11 AM
you'll be much missed..

wish you all the be Kurtis :)

toby
08-02-2007, 11:58 PM
Kuzey, nope, William's safe from me. I'll be helping to develop training materials for a large company that has nothing to do with 3D or graphics.
Auto racing? Espionage? Come on, it's gotta be something exciting.

Kurtis!! Who's going to tell us to "cool it guys, or this thread will be shut down"?? There's going to riots! Bedlam! Hordes of Locusts!

toby
08-03-2007, 12:01 AM
Gotcha

T-Light
08-03-2007, 09:36 AM
Hang on, so your off to work for M&M? Jeez Louise, how on earth did we all miss that. :D.

Oh no, last few hours on the job, Very best of luck where ever your going :thumbsup:

kopperdrake
08-03-2007, 09:39 AM
So long dude - yours and Chuck's name are the face of NewTek on these forums since I've been loitering here...I wish you all the best :thumbsup:

Sarford
08-03-2007, 06:13 PM
Bye Kurtis, sorry to see a part of this family go. I wish you the best in your new job!

tonybliss
08-03-2007, 08:44 PM
Hey Kurtis thanks for you active participation and support with our school and anything else that came your way from me ....
Darnit now i would have to haggle another, that would have been in your capacity.... ;)
ALL the BEST in YOUR endeavours .... :D :D :D

hrgiger
08-03-2007, 09:17 PM
Good luck Kurtis. Thanks for your time here with us.

JeffrySG
08-04-2007, 09:12 AM
All the best of luck to you Kurtis! We'll miss you!

Bog
08-06-2007, 05:40 AM
Good luck, Kurtis! I'm mildly stunned by this... take it easy, feller.

Verlon
08-06-2007, 11:04 PM
Ack! My Contact! My Contact! Thanks for showing me around when I dropped by (unannounced). I'll surely miss having you around the forums.

Gary Wales
08-07-2007, 03:17 AM
The very best of luck for the future Kurtis!

Beyond the blue horizon lies a rising sun...

byte_fx
08-07-2007, 11:03 AM
Best of luck Kurtis.

The first time I called customer support you answered and took care of everything promptly and courteously. Something I will always remember.

Sorry to see you go.

Thanks for all your efforts regarding NewTek and the LightWave community.

Best of luck.

Elmar Moelzer
08-08-2007, 10:41 AM
Best of Luck Kurtis!
I am sorry to see you go!
CU
Elmar

Imatk
08-08-2007, 06:25 PM
Good luck Kurtis, we'll miss you!

Nemoid
08-08-2007, 06:50 PM
hey kurtis! i think you wil be highly missed from this community ! i find you was great in doing your job about Lw promoting and supporting !

well i wish you a great luck in your old-new career . do what you love doing and you'll be happy. :)

and also : pardon us users when we sometimes write harsh critics about our beloved software and the staff which produces it. we sometimes write beyond our intentions !

Anti-Distinctly
08-10-2007, 05:08 AM
Adios - and have fun.

ShawnStovall
08-16-2007, 02:25 PM
Ciao Kurtis, thanks for the help on the forums.

hmmm... now we have to set up the disengagement cerimony....:D

phillydee
08-16-2007, 03:25 PM
Good luck, Kurtis.... and troll around here sometime :)

Exception
08-17-2007, 09:55 AM
Bay Bay mr Kurtis,
thanks for all the years.

Good luck to you!