PDA

View Full Version : Any Ideas?



Barred
07-29-2006, 04:49 AM
Hi guys,
Whilst trying occlusion values with the great robot in the LW9/lights dir I have a strange match up.

I rendered an occlusion layer with a white colour and 15% luminosity and another pass with the standard object. The only differnece that I mad is added a floor and a purple back ground.

Once I had the 2 images saved as bmp's they were loaded into photoshop. The occlusion layer was coppied and pasted over the colour image and multiply was used for the blend of the 2 layers. I have not moved either image and have changed no camera settings or anything else.

This is the result
http://img.photobucket.com/albums/v470/Barred/Mech-Purple3.jpg

Any ideas would be more than welcome.

kruemel_1
07-29-2006, 06:48 AM
The 2nd image is not moved, it's scaled down. Do the 2 images have the same resolution?

Barred
07-29-2006, 08:33 AM
Hi Kruemel, no settings were changed either in the camera or when the images were saved. That is why I am a bit supprised by the results as both images are 1280x1024 24bit bmp's. Thanks for trying.