PDA

View Full Version : Strange echo



Rich Deustachio
01-15-2005, 05:35 PM
I recently was outputting a job to a freestanding DVD burner, a VHS duplicator and a Sony DSR-11 DVCAM deck all at the same time. The audio was echoing and I thought it was caused by the rendering of the project to a single DV clip but it wasn't. What was causing it was feedback from the firewire on DVCAM deck. The DV slider on the mixer was turned all the way off but it was still sending audio to VT4 output. Now I have done this several times before without a problem before VT4 SP1. My solution was to just disconnect the firewire from the deck but it still doesn't explain the audio coming into the system. I also did not have the capture panel input set to the DV deck.

ted
01-17-2005, 11:01 AM
No idea Rich.
One time I had a cue Mike accidently turned on, on our audio board and got the same results. It took a while to figure out that one! :rolleyes: