PDA

View Full Version : She's back with a new problem... HELP!



sistah
06-04-2004, 05:20 AM
Hi all,

Y'all ready for my new little problem?

When I want to output my VT3creation to DVcam, Amber or whatever, my creation becomes black and white.
I think I got my preferences right (output = Y/C, 0 ire, PAL), I certainly got my cables plugged in right... But my colours are still missing.

Is there anyone out there who can help me get my output settings right?

Thanks y'all,

Sistah

SBowie
06-04-2004, 05:36 AM
Just to confirm your Prefs, the one shown below is significant. If that is properly set, cabling is the prime suspect. If it all seems good, I'd try another S-video cable...

sistah
06-04-2004, 08:12 AM
And the problem is..........
Something in my SX-8 is wrong. Thank god I have all weekend to find that out. Anyway, I got around the problem.

Thanks anyway Sbowie.

Jim Capillo
06-04-2004, 09:59 AM
Sistah,

Have you tried a cold reboot? That fixes a lot of strange happenings.......;) :p

SBowie
06-04-2004, 12:25 PM
Originally posted by sistah
Something in my SX-8 is wrong. Well, that can happen, but it's pretty rare. If the problem does lie in the SX-8 (or the daughtercard), there will be no problem visible when you output from the standard VT output cable connected directly to the VT card itself (that is, the cable which is normally used when you don't have an SX-8...)