PDA

View Full Version : Net Switch for NDI network.



brook286
10-11-2017, 10:03 AM
Hi folks,
I'm doing the final specs for a multi (9) camera facility that will be using 2 Tricaster Minis. I'm planning to use the versatility of NDI thru out the system. We have the wiring for a NDI dedicated network, yay
My question (finally), what network switches should I use? POE is needed to power the cameras and I plan to use SFP fiber connection between switches.
Any model or general specs would be appreciated.
Thank Brook

kanep
10-11-2017, 08:20 PM
Make sure you spec a switch with PoE+ the NewTek PTZ1 camera needs that as do most other PTZ cameras.

I've been happy with TP Link network units and they have some switches that match all of those requirements.

PIZAZZ
10-13-2017, 11:23 AM
Ubiquiti managed switches are what we are specing and building out with now. If you are not an IT person then you need to find one you like and trust.
Vlans are going to be your friend in the very near future.

https://www.ubnt.com/edgemax/edgeswitch/
or the 10G solution
Ubiquiti Networks US-16-XG 10G 16-Port Managed Aggregation Switch

Spend the money now or spend it later once you try to do too much on a $100-200 consumer switch.

lukerctv
10-17-2017, 09:16 AM
Definitely agree with the UBNT recommendation. I've been slowly transforming our fiber network from one-way video feeds to an impressively robust town-wide network. I am the only "tech guy" so it falls completely to me for speccing and implementation, and Ubiquiti sure makes it easy for one person to manage all that.

That US-16-XG switch is an aggregation switch though - there's only 4 copper 10GBE ports, and the rest are empty SFP+ slots so you can add your own modules. I suppose you could add 10gbe copper modules, but those are hundreds of dollars, and 10GB BiDi SFP+ 20KM fiber modules are more like $50 each.

It is definitely impressive having a TriCaster in our main studio receive all the inputs from the 3 other TriCasters set up around town.