PDA

View Full Version : Speed Modelling Challenge #244 - 3D Typography



ANS
01-15-2014, 02:26 PM
Speed Modelling Challenge #244 - 3D Typography

Rules:
1. Every week there will be a subject for you to model along with a time limit. You should spend no longer than the allocated time, then post a render of your model. As in most challenges like this, your honesty on modelling times is essential. How you interpret the brief is up to you as long as the final model conforms to what is asked for.
2. Post a wire-frame and a render at 800x600 or larger.
(For wireframe help go to: http://www.artssphere.com/plugins/polygoncoloring.php
3. LightWave must be used for modelling. 3rd party Plug-ins are allowed.
4. You can enter as many times as you like, posting each in this thread. If you run over the time, the model can still be posted but won't be subject to the judging.
5. Time spent on texturing, setting up a scene for a render and rendering is not included in the allocated period.
6. The winner is judged by the challenge starter and the prize is to set up the challenge after next week's.

*************************************************
This week's topic: 3D Typography.
It can be logotype, any text, tag etc. - it can also contain elements that is not text, like ornaments or so.
Please look here for examples: GOOGLE IMAGES!! (https://www.google.pl/search?q=3D+typography&safe=off&client=opera&hs=GRl&source=lnms&tbm=isch&sa=X&ei=RnjWUsqBLYGq7Qb7oIGYBw&ved=0CAkQ_AUoAQ&biw=1577&bih=834)

Time Limit: 60 min.
Deadline: Wednesday 22th January, 2014 23:59:59 GMT

Enjoy!

Kryslin
01-15-2014, 11:45 PM
Ok, I think I got the concept behind this one...
http://img.photobucket.com/albums/v636/Kryslin/funstuff/Speed%20modeling%20Challenge%20Renders/th_smc_3dtypography_zpsb916fd40.jpg (http://smg.photobucket.com/user/Kryslin/media/funstuff/Speed%20modeling%20Challenge%20Renders/smc_3dtypography_zpsb916fd40.jpg.html) http://img.photobucket.com/albums/v636/Kryslin/funstuff/Speed%20modeling%20Challenge%20Renders/th_smc_3dtypography_wires_zps53c2d19f.jpg (http://smg.photobucket.com/user/Kryslin/media/funstuff/Speed%20modeling%20Challenge%20Renders/smc_3dtypography_wires_zps53c2d19f.jpg.html)

Nothing fancy here...LW's Logo button, LWCAD's Mass Round tool. 10 minutes. Couldn't get dynamics to help any, so every letter is positioned by hand in layout, and some cheesy VFX added.

ANS
01-16-2014, 04:53 AM
Kryslin, you nailed it :) and you have 50 min. to make it more complex & funny!
Good start and I hope for more great entries! :)

Iain
01-16-2014, 01:32 PM
Great concept ANS.

And no excuses for not getting an entry done with something this quick.

XswampyX
01-16-2014, 03:47 PM
Modelled in Lightwave, rendered with the Lightwave -> Octane plugin.

http://i465.photobucket.com/albums/rr16/xXswampyXx/CoolTxt_Small_zps50336c81.jpg (http://s465.photobucket.com/user/xXswampyXx/media/CoolTxt_Small_zps50336c81.jpg.html)

dsoell
01-17-2014, 07:45 AM
119345

All right you guys ... now this is a first. Finally had some time to actually do something for a contest. I probably haven't followed the rules to the dot, as I have used some 5 minutes of ZBrush for a deformation (LW's falloffs still drive me crazy sometimes). Logo tool, LWCAD rounder, a lot of modify with fall off. Modelling time around 40 mins. Rendered in LW with a teensy bit of toning in PS. Hope you like it. P.S.: as a long time lurker I really have to thank you guys for all the help you've provided over time. Seriously THANK YOU!

Dirk

One more thing ... used dp filter for the lightstreaks. That is NOT Photoshop!!

Iain
01-17-2014, 09:07 AM
Very nice Dirk!

Iain
01-17-2014, 11:34 AM
Not even sure if this works.........................

Iain
01-17-2014, 12:24 PM
A real quickie.............

bellmore
01-17-2014, 01:39 PM
Here is a model of METALLICA. I used almost the whole time. I was going to add some vines to the ground but would not have enough time left.119357119358

bellmore
01-17-2014, 02:07 PM
Here is a quick one.119367119366

bellmore
01-17-2014, 09:45 PM
The middle of nowhere.119383119384

bellmore
01-17-2014, 10:19 PM
Lost very simple. 119386

bellmore
01-17-2014, 11:58 PM
Here is another quick setup. Lightwave 3D impaled!!!119389119390

bellmore
01-18-2014, 01:42 AM
Here is the Grateful Dead 3D text.119391119392

bellmore
01-18-2014, 04:09 AM
Let the good times roll.119393119394

bellmore
01-18-2014, 11:08 AM
Scrabble anyone? I used the stencil tool to get the letters and numbers on the blocks.119398119399

jonbee
01-19-2014, 02:28 AM
119412119413

My quick stab at this idea ^^

XswampyX
01-19-2014, 06:10 AM
Extensive use of instancing.

http://i465.photobucket.com/albums/rr16/xXswampyXx/Grass_Txt_Small_zps446135d8.jpg (http://s465.photobucket.com/user/xXswampyXx/media/Grass_Txt_Small_zps446135d8.jpg.html)

bellmore
01-19-2014, 11:32 AM
A reflective mirage in the desert.119427119428

bellmore
01-19-2014, 05:26 PM
Pushing the red button makes you...119433119434

ANS
01-19-2014, 07:49 PM
Xswampy, great idea with instances, and nice design!
Bellmore, you 're so much productive :) go on :)
And so many interesting entries so far... but not every with wires.
There come my production. It's made from 2 similiar font faces : SECTOR font (http://www.dafont.com/search.php?fpp=100&text=Science+FICTION&q=Sector)
119435 119436
I got another idea, maybe I can make it into object...

Kryslin
01-19-2014, 09:11 PM
Pushing the red button makes you...119433119434

I can do that, too...
http://img.photobucket.com/albums/v636/Kryslin/funstuff/da_button2.jpg (http://smg.photobucket.com/user/Kryslin/media/funstuff/da_button2.jpg.html)
(Old image, not valid for entry...)

I should have another entry coming...

VictoryX
01-20-2014, 01:35 AM
My entry first in a long time, modeling time approx 30 minutes give or take a minute. Got the reference from the google search provided. In retrospect I should have done the words 8-Bit instead of Model, but eh hindsight ya.

COLOR

http://i526.photobucket.com/albums/cc346/adjustvolume/Typography_zpse8ce84bd.jpg (http://s526.photobucket.com/user/adjustvolume/media/Typography_zpse8ce84bd.jpg.html)

WIRES

http://i526.photobucket.com/albums/cc346/adjustvolume/TypographyWire_zps7d2020d1.jpg (http://s526.photobucket.com/user/adjustvolume/media/TypographyWire_zps7d2020d1.jpg.html)

bellmore
01-20-2014, 06:57 AM
Here is some graffiti text. It says BRAIN.119448119449

bellmore
01-20-2014, 07:05 AM
Nice one Kryslin. I think I remember seeing that one as an entry in a past challenge.

bellmore
01-20-2014, 01:58 PM
H2O lifesaver text.119456119457

ANS
01-20-2014, 08:40 PM
A little overtime and not completely finished...:
119461 119462

bellmore
01-21-2014, 11:01 AM
Hammer smashed text.119482119483

ANS
01-21-2014, 03:19 PM
Final version. (even more overtime :) )

119486

bellmore
01-21-2014, 06:49 PM
Here is a spin off of psycho.119490119491

Iain
01-22-2014, 06:01 AM
Jeez Bellmore. No more? :)

dsoell
01-22-2014, 06:36 AM
Jeez Bellmore. No more? :)

:)

bellmore
01-22-2014, 08:36 AM
I might have one more before the deadline.

Slartibartfast
01-22-2014, 03:02 PM
119503119504

Some ordinary subd-modeling and then fracture-tool on the ice :-)

ANS
01-22-2014, 03:44 PM
Nice one, Slartibartfast!

119505 119506

fracture tool is here too :)

Wittywop
01-22-2014, 04:35 PM
Nice Entries All!!

So the modeling took me just under an hour. It was the trying to get the dynamics to act like I wanted that took forever.

119511119512

akaracquel
01-22-2014, 05:22 PM
No wires to show for this week :D


http://youtu.be/0eOTcjQ7C2s

ANS
01-22-2014, 05:34 PM
last one from me.
119513 119514

Akaracquel, you and your choccolate writing wombat !! :) :D :hat:

hrgiger
01-22-2014, 05:35 PM
You are a strange bird Ayca. Or strange wombat maybe.

jeric_synergy
01-22-2014, 07:23 PM
A little overtime and not completely finished...:
119461 119462
That's interesting: how did you approach that??

JoePoe
01-22-2014, 07:35 PM
1:20 model time.

I used to draw this all the time as a little kid. I think I was better at it then....

119515

bellmore
01-23-2014, 10:52 AM
I know this one is late but I decided to post.119540

Wittywop
01-23-2014, 11:29 AM
Quick declare a winner before bellmore posts anymore. :)

Nice work all!!

I know it was over time but would love to see your wires JoePoe.

ANS
01-23-2014, 12:54 PM
Kryslin: simple, but good lokin' :) there still room for something more complex.
XswampyX: Cool looks cool! really. But no wires? and Grass- great idea, great render, again no wires..
dsoell: I really like it! looks dynamic, modern, interesting light pattern... and no wires?
Iain: Good concept with pistol, trigger at first is invisible (i spot it on wires first), DOF/Hyperopia is ok.
bellmore: our hero! very productive! wow! all nice! wow! such numbers! wow! :) Metallica, Creep, sign to nowhere, lost, impaled Lightwave (it's a suggestion? :)), grateful dead, good time roll, scrabble, mirage, push, brain, H2O, smash, back, kind... are I don't forget anything? :) 15 entries. It's speedmodelling record, for sure. But there no numbers are important, only the appearance of entries. There are a room for improvements.
jonbee: good, orginal idea! and nice letters.
VictoryX: you right: 8 bit was better choice for word, but anyway- it's looks good, and clean model!
Slartibartfast: I like it a lot! simple idea, matching blocky lettering, good lokin' ice and very good, clean wires
Wittywop: you smashed it :) good wires, better than render.
Akaracquel: as hrgiger says, you're strange wombat :)
Joe Poe: I like your shark letters a lot- gtreat render, but it's overtime and no wires.

Winner: Slartibartfast.
Congratulations!

And great job, everyone! :) so:
119546
and do more great works! :)

ANS
01-23-2014, 01:05 PM
That's interesting: how did you approach that??

It's quite simple: start from ball, divide it to hemispheres and with bridge tool- make capsule lookin' object. Next- duplicating, transform and booleans to join them and making letters, there was a lot work with fixes and repairing mesh after booleans ;/ at end- adding loops here and there - for better edges in subpath mode.
paint splashes- letters was duplicated, then cut with knife tool for apriopriate parts, unnecesary polygons have been removed, then- extruded with multishift tool. After this some tweaking was done to form paint stains.. that's all.

Slartibartfast
01-23-2014, 01:36 PM
Slartibartfast: I like it a lot! simple idea, matching blocky lettering, good lokin' ice and very good, clean wires


wohoo! Thanks a lot ANS! I showed my picture to my supportive family. Or so I thaught... All they had to say was: "what is IOE?" LOL :D

I'm happy to see this challenge is beeing so crowded again! Good work everybody!

bellmore
01-23-2014, 01:41 PM
Congrats Slartibartfast. Verhy nice model you got there.

Yes I have a lot of room for improvement. I started with Lightwave 7 and gave it up after 2 days and made my way over to MAX. I decided to try Lightwave again and upgraded to 11. The hardest thing for me is knowing what I want to make without relying on my MAX background. That approach does not work very well. I find myself only using a fraction of the tools in modeler, bevel, extrude, connect, etc, the very basic tools. I am slowly going through the manual to get used to all the other tools that I have yet to use. This challegne was the first time that I used anything associated with text in Lightwave.

JoePoe
01-23-2014, 02:15 PM
Good job all!

Slartibartfast, congrats! :thumbsup: ... IOE :D

Aka..... ;D

Wittywop.... my wires. And a slightly better texturing/render :hey:.

119550 119553

Slartibartfast
01-23-2014, 02:48 PM
I like the shark JoePoe! When I see the animal planet-animals made up of letters, I always think I'd try that. Never did though. Thx anyway! And thx bellmore! Keep practising, you will get very far with just those basic tools you mentioned!

VictoryX
01-24-2014, 02:19 AM
That shark text is tops, Joe.

Slartibartfast
01-24-2014, 01:12 PM
ANS, you won last week, so you may start the next challenge, while I figure something out to next wednesday.

ANS
01-25-2014, 10:53 AM
Me? Again? What have I done wrong that I must once again lead the competition? :)
anyway, please look here: Speed Modelling Challenge #245 - Drawing tools (http://forums.newtek.com/showthread.php?139844-Speed-Modelling-Challenge-245-Drawing-tools)
and post great entries (and be so productive as sir Bellmore!) :)