PDA

View Full Version : Audio Channel selection for Embedded SDI



Labmaster
06-05-2013, 02:09 AM
Hello,

we have a problem using Tricaster 8000 with various cheap HDMI to SDI converter.
The used converters are more from the cheap category but most times perform better than any brand converters, exept one thing.
Most of this converters only features embedded audio on channel 1 and 2 but also seems to deliver a constant noise signal on channel 3 and 4.
In some situation when we want to mix channel 3 and 4 in the TC comming from other valid sources we are not able to use one of this converters even if we only want to use channel 1 and 2 of them, as they would output the constant signal at channel 3 and 4,

Request:
For fixing this issue it would be enought to be able to mute each single channel (or at least channel 3 and 4) on every input that is configured for Embedded SDI.


Best regards,
Walter

SBowie
06-05-2013, 06:37 AM
Understood ... :newtek: