PDA

View Full Version : LW CAD problems with LW 11



aidenvfx
08-26-2012, 11:29 AM
I am trying to use the Curve to poly tool but for some reason it does not add enough points in the conversion so I get a very jagged end result. I am using LW 11 service pack 1 and LWCAD 3.61 on a Mac.

Any suggestions would be great

COBRASoft
08-26-2012, 12:01 PM
Try re-installing LWCad

Not working: contact Viktor and/or upgrade to latest version (you won't regret it). All works fine here with LWCad 4.2 and latest LW SP3.

aidenvfx
08-26-2012, 12:13 PM
Try re-installing LWCad

Not working: contact Viktor and/or upgrade to latest version (you won't regret it). All works fine here with LWCad 4.2 and latest LW SP3.

Ok so I solved the problem at least in LW 10. I need to get a new licence for LW 11 S3 due to the change with no dongle i believe. Under the Numeric Curve to poly the max freeze error was set to 350mm. When I changed that to 10mm it fixed the problem.

hrgiger
08-26-2012, 07:00 PM
I was going to say, thats what the max freeze error is for.

JonW
08-27-2012, 12:20 AM
You don't need a new licence if something is working with LWCad. LWCad will just NOT work at all if you don't have a licence.