PDA

View Full Version : Speed Modelling Challenge #146 Car exterior & interior



MDSPECIFIC
11-10-2011, 01:34 AM
Speed Modelling Challenge #146 Car exterior & interior
*************************************************
Rules:

1. Every week there will be a subject for you to model along with a time limit. You should spend no longer than the allocated time, then post a render of your model. As in most challenges like this, your honesty on modeling times is essential. How you interpret the brief is up to you as long as the final model conforms to what is asked for.
2. Post a wire-frame and a render at 800x600 or larger.
3. LightWave must be used for modeling. 3rd party Plug ins are allowed.
4. You can enter as many times as you like, posting each in this thread. If you run over the time, the model can still be posted but won't be subject to the judging.
5. Time spent on texturing, setting up a scene for a render and rendering is not included in the allocated period.
*************************************************

This week's topic is: Car exterior & interior

You can model everything you see outside and inside of a car (excluding parts like those under the hood, motor, pumps, spark plug ...)
Whatever you want: car logo brand, headlights, stop lights, spoilers, car wheel, windshield wipers, tires, doors, opening handles, or something like steering wheel, dashboard, gear stick, sound system board, speakers, car computer/gps displays, seats, interior lights case, inside door handles etc. I think you get me.

I wish you great fun!

Time Limit - 90 minutes.

Deadline: Wed. 16th November 2011. 22:00 G.M.T.

COBRASoft
11-10-2011, 03:20 AM
Nice topic! I can't remember we had one like this. Thx for the 90 mins, I for one will certainly need that time :).

Lewis
11-10-2011, 05:22 AM
Interesting topic, I'll watch out on this one :D.

Rabbitpenny
11-10-2011, 02:57 PM
One Mirror. Only 3547 parts to go, and I'll have a '57 Chevy.:)

https://sites.google.com/site/rabbitpenny3d/home/MirrorChevy001.jpg

boeing727223
11-11-2011, 07:30 AM
I'll get on it after the modeling the '58 tutorial by Lewis3D ;)

stevenpalomino
11-11-2011, 04:05 PM
Mazda logo! :)
Model time: about 45 min.

stevenpalomino
11-11-2011, 04:07 PM
And the wires!

Iain
11-11-2011, 04:24 PM
The decidedly odd steering wheel from one of my all-time favourite cars, the Citreon DS. 20 minutes modelling.
The French truly understand that beauty is complemented by a smattering of ugliness.

http://img703.imageshack.us/img703/4536/wheelds.jpg (http://imageshack.us/photo/my-images/703/wheelds.jpg/)

XswampyX
11-11-2011, 05:36 PM
Heh, nice detailing there Iain. How many poly is that? :)

Not a big Citroen fan, they have funny suspension.

akaracquel
11-11-2011, 07:41 PM
Attempting to do an entire car in 90 minutes was an interesting experience of absolute terror for me ..but I had a lot of fun trying! :D Have a great weekend everyone :)

http://slaughterhouse.com.au/LW/SPEED/146/guirokali01.jpg

http://slaughterhouse.com.au/LW/SPEED/146/guirokali02.jpg

djwaterman
11-12-2011, 12:34 AM
The decidedly odd steering wheel from one of my all-time favourite cars, the Citreon DS.

I'm just trying to think of how you did what you did.

MDSPECIFIC
11-12-2011, 02:57 AM
Nice modeling/renders so far! :thumbsup:

Iain
11-12-2011, 03:07 AM
I'm just trying to think of how you did what you did.

I just made the main object as a Toroid centered on 0,0,0 then made a little one, placed it and arrayed it (900 times!) around the big one.
Easy! 165000 polys!

Its fine on its own but I won't use it in a busy scene :D

Wittywop
11-12-2011, 11:03 AM
I have been eager to get back to modeling but life has gotten in the way. Had some time last night and figured I'd use it here.

I have never seen a Foot Print Gas pedal in person. And honestly the only time I have ever heard of it was in the movie Joe dirt. So I looked up some reference pics and this is what I came up with. Not sure how long it took me, was just fun to model. Enjoy! :)

99275

99276

sublimationman
11-13-2011, 06:33 PM
OK, so this may be considered too simple for you guys but here is an old MoonEyes fuel tank. We use to use these on dune buggies. About 45 minutes modeling (most of that trying to get the $%^# cap to look right). And 10 minutes surfacing.

jonbee
11-14-2011, 01:35 AM
Just my quick little entry for the week; Not a very technical model, but it get's the point across :P

http://forums.newtek.com/attachment.php?attachmentid=99379&stc=1&d=1321259633

http://forums.newtek.com/attachment.php?attachmentid=99380&stc=1&d=1321259633

MDSPECIFIC
11-14-2011, 03:29 PM
Modeling 45min, texturing/lightning 15min.

COBRASoft
11-14-2011, 03:48 PM
Sorry, too much playing with LW 11 :D.

Nice entries though!

R.Feeney
11-14-2011, 07:03 PM
I went a little over the time with this..
A flying car of sorts

jonbee
11-14-2011, 11:12 PM
Modeling 45min, texturing/lightning 15min.

Any chance I could get a look at your source for the leather? I hate how mine came out :D

MDSPECIFIC
11-15-2011, 01:37 AM
@jonbee: Sure thing. Basic bump for leather is INVERTED crumple procedural texture. I also have a little turbulence procedural to make small bumps on top of basic leather bump (ADD layer style). :hey:

Rabbitpenny
11-15-2011, 04:37 PM
Cage for '57 Chevy mirror:

https://sites.google.com/site/rabbitpenny3d/home/MirrorChevyCage001.jpg

Stylized Jaguar Hood Ornament: Searching the Web, the ornament seems to change with the years. With that and no ortho shots, I took some liberties :) :

https://sites.google.com/site/rabbitpenny3d/home/jaguarHoodOrnament002.jpg
https://sites.google.com/site/rabbitpenny3d/home/jaguarHoodOrnamentCage002.jpg

Link here (http://www.youtube.com/watch?v=3h_qrpVnaaI) to a video of hood ornament construction. Very VERY basic organic modeling...for beginners.

XswampyX
11-15-2011, 04:46 PM
Nice Jag. :thumbsup:

R.Feeney
11-15-2011, 06:28 PM
Cool stuff, I particularly like the jag

I forgot the render for my sky car

Rabbitpenny
11-16-2011, 07:20 AM
XswampyX, R.Feeney: Thanks. That means a lot to me.

R.Feeney: Stupendous sky car. Amazing speed model.

akaracquel
11-16-2011, 01:42 PM
Ooooh yeah, the Jag rocks, Rabbitpenny! :)

Iain
11-17-2011, 02:07 AM
Great entries folks.

New challenge................

http://forums.newtek.com/showthread.php?p=1197868#post1197868

Rabbitpenny
11-17-2011, 06:35 AM
Akaracquel: Thanks. And thanks for teaching me a new word. Never knew what a "guiro" was.

MDSPECIFIC
11-17-2011, 11:20 AM
I'm in a hurry, so I'll be quick but righteous! :hey:

@Rabbitpenny: Nice Mirror and nice Jag too! I like that Jag especially! Very cool beast render! :thumbsup:

@stevenpalomino: Nice and clean Mazda logo! I like letter M! :)

@Iain: Cool steering wheel, like that sss surface, marble tiles too! :)

@akaracquel: Nice abstract car fella. I like those eyes and your improved subpatching skills! :)

@Wittywop: Nice foot pedal! Nice and clean model, render also! :)

@sublimationman: Cool tank, nice model, coll tank cap! :)

@jonbee: Nice and cool steering wheel, nice subpatching. I hope with new leather texture it will be cooler! :thumbsup:

@R.Feeney: Fantastic sky car model and very cool render! You are little over the time, but still as a host of this challenge I will take your work in consideration because you put extra effort on this. :D

The winner is R.Feeney. Congratulations!

Thank you all for participating!
Let's roll on the next one!

Rabbitpenny
11-17-2011, 12:52 PM
Congratulations R.Feeney. Like I said, amazing speed work.

R.Feeney
11-24-2011, 12:22 PM
My apologies I didn't see this until i went looking for this weeks challenge.
Thanks :)

COBRASoft
11-24-2011, 03:34 PM
Congrats Richard! You're back :)