PDA

View Full Version : Speed Modeling Challenge #109 - Speed Modeling Challenge Chair.



COBRASoft
02-23-2011, 10:39 AM
Speed Modeling Challenge #109 - Speed Modeling Challenge Chair.
*************************************************
Rules:

1. Every week there will be a subject for you to model along with a time limit. You should spend no longer than the allocated time, then post a render of your model. As in most challenges like this, your honesty on modeling times is essential. How you interpret the brief is up to you as long as the final model conforms to what is asked for.
2. Post wires and renders (if possible) at 800x600 or larger.
3. LightWave should be used for modeling. 3rd party Plug ins are allowed.
4. You can enter as many times as you like, posting each in this thread. If you run over the time, the model can still be posted but won't be subject to the judging.
5. Time spent on texturing, setting up a scene for a render and rendering is not included in the allocated period.

*************************************************

This weeks challenge is straight and simple, model a chair :). this can be a chair for the diner table, for relaxing, for outside or in the bedroom. If you feel lucky and want to model an old emperor chair, go ahead and impress us all.


Time Limit - 60 minutes.
Deadline - Wednesday 2nd March 2011, 2200 GMT.

VonBon
02-23-2011, 10:42 AM
you mean the 2nd of March :hey:

Iain
02-23-2011, 11:31 AM
Aah great - I love a challenge that has practical uses!

COBRASoft
02-23-2011, 11:53 AM
you mean the 2nd of March :hey:

Ok, this was really bad. Corrected :).

Iain: glad you like it, I hope more people will join in again. I mean, you can make a chair in 5 minutes and still have a good result.

R.Feeney
02-23-2011, 12:09 PM
I might even try to climb out of my pit to have a go at this one :)

COBRASoft
02-23-2011, 12:30 PM
That would be nice Richard, it's been a long time since we saw some challenges from you :).

VonBon
02-23-2011, 05:01 PM
naw, you better get back in that hole :devil:

stevenpalomino
02-23-2011, 05:04 PM
great! Simple and flexible! Great combo for creativity ;)

COBRASoft
02-23-2011, 07:49 PM
Hey guys,

Here is a chair in the shape of a ball. A Belgian television channel is using it a lot for the presenters between the programs.

Modeling took 20 mins, rendering about an hour.

Simple & flexible, that's what these challenges are all about, no? :thumbsup:

Greetings,
Sigurd

1080p
02-23-2011, 09:33 PM
My chair (good for watching TV & adding pillows on the bottom, left & right also the holes at the bottom are good for hiding cigars), I am still learning...

http://www.newtek.com/forums/attachment.php?attachmentid=93038&stc=1&d=1298522069
http://www.newtek.com/forums/attachment.php?attachmentid=93039&stc=1&d=1298522069

Iain
02-24-2011, 01:10 AM
Here is a chair in the shape of a ball. A Belgian television channel is using it a lot for the presenters between the programs.


Nice model. There were some great designs done in the 60s and 70s by people like Aarnio.
Other great references for google are Jacobsen and, of course, Eames
http://www.designclassics.co.uk/charles-eames/?gclid=CLTIi7eroKcCFRRC4QodaWefYA.

Some of the great architects were responsible for iconic chair designs too like Le Corbusier and Mies Van Der Rohe.

chco2
02-24-2011, 09:09 AM
Did this one similar to the religion contest. Redid the model completely to see how long it would take. 35 mins :)

It's a praying chair..

http://files.designburo.nl/lightwave/newtek_forum/bidstoel.png

and the wire:

http://files.designburo.nl/lightwave/newtek_forum/bidstoel_wire.png

Amurrell
02-24-2011, 06:55 PM
Man I would have had to be working on something like this. Never entered a speed modelling contest, but I thought, "What the heck". So here it is. Simple as it is I think it took me about 30min initial and another 15 for a couple of tweaks. The render is out of VPR, dark and moody for a reason or two. 1. It's unfinished and 2. just because :) Be gentle.

93083

oliversimonnet
02-24-2011, 09:32 PM
ok here is my entery.
57 min modeling. clocked hehe
its a future work chair :)
im thinking of carrying on with it a bit aswell :) but that wont be for the challenge just for fun
93088 93089
93090

COBRASoft
02-25-2011, 02:45 AM
Nice entries so far, keep em coming! :)

Iain
02-25-2011, 07:22 AM
This is an office meeting chair I saw in a magazine a while ago and have been meaning to model.

It was done pretty quickly but I spent about 50 minutes on it tweaking the proportions until I was happy it was right.

XswampyX
02-25-2011, 06:40 PM
Life can be hard, being a chair....

http://i465.photobucket.com/albums/rr16/xXswampyXx/DistressedChair2.jpg

About 30 mins modeling, and a fair bit more for the render.

chco2
02-26-2011, 01:05 AM
Dunno if this counts, did this one a while back for another challenge. I know it was under the hour for modeling..

http://files.designburo.nl/lightwave/newtek_forum/chair_knobs.png

and the wire:

http://files.designburo.nl/lightwave/newtek_forum/chair_knobs_wire.png

oliversimonnet
02-26-2011, 08:43 AM
nick chair
looks like its from a spaceship or something :)

chco2
02-26-2011, 10:40 AM
Lol :D
It should look like the famous Captain Kirk chair from Star Trek (original series) Like so :

http://www.gizmodiva.com/entry_images/1208/30/Star_Trek_Captain_Chair.jpg

and:

http://trekmovie.com/images/sttt/15304585anthonypascale119200833928AM.jpg


nick chair
looks like its from a spaceship or something :)

JeffrySG
02-26-2011, 10:45 AM
Very nice models everyone!!

ArtGoblin
02-26-2011, 03:26 PM
Here's my entry, grew up with two of these in my living room... guess that's the reason I like 'em so much. I was planning on sculpting a some quick leather wrinkles and some buttons into the cushion (or whatever the thing is called that you actually sit on), but saw I was running out of time, so I just left it here like this... I'll see how much realism I can get into this with some textures later. But here are the wires....

http://img192.imageshack.us/img192/7039/falconchaircompedwires.jpg


Great entries so far guys keep it up !

ArtGoblin
02-26-2011, 08:38 PM
Ok... I couldn't just leave it like that ! so I took it to Zbrush for 15 minutes and added some nessisary details to the cushion or whatever. I'm not sure how we usually deal with sculpting... but I'm guessing it disqualifies me since zbrushin' it made me go over the 60 minutes. I'm still happy with it since it's been a long time since I've succesfully managed to sculpt something to my desire like "real quick" then throw it back to LW. I should do this more often, make zbrush a more active tool in my general workflow. Hope you like :)


http://img62.imageshack.us/img62/3638/falconchaircompedtextur.jpg

Wittywop
02-26-2011, 09:57 PM
WOW Nice Entries all!!! Glad I looked at them after I finished mine or I would still be tinkering with mine.

I kinda looked at some old chairs then tried to make something similar.

I used the Surface Tester Scene, and am pretty pleased at how the lighting came out.

Think it took me an hour or so. Didn't really pay attention to the time, just got into the modeling :)

93171

93172

XswampyX
02-27-2011, 05:38 AM
A fine collection of chairs. The week off seems to have done some good.

Not really a chair, but you do sit on it.

http://i465.photobucket.com/albums/rr16/xXswampyXx/BeanBag.jpg

And some wires for the other one.

COBRASoft
02-27-2011, 06:47 AM
Great designs people!

About ZBrush, I guess it is a form of modeling (as in adding and changing geometry). If somebody disagrees, please tell, so I know how to 'judge' the entries later on.

chco2
02-27-2011, 06:51 AM
I think this has been discussed a few times now and if I'm not mistaken, modeling should be done in Lightwave. Rendering and post stuff can be done using other software.

ArtGoblin
02-27-2011, 07:26 AM
I guess Zbrush would be ok, if I were only using it to paint on some bump maps or color maps, but since in my case I used it to add form into the cushions via sculpting I'd say I disqualify myself. Anyways, I discovered I made a mistake when exporting back from Zbrush, so now I did it correct so the cushion is sitting better in the chair. Just having fun with this one :)

http://img231.imageshack.us/img231/3638/falconchaircompedtextur.jpg

ArtGoblin
02-27-2011, 07:32 AM
loving that bag of grain (I think thats what they usually fill it with) XswampyX! You are really taking use of the fiberfx. FFX is one of those awesome addition's that came with the free updates on the 9x version that I just haven't seemed to gotten around to play with, no matter how cool I think that feature is. I think I feel like I need to throw something out of my brain to make room for some FFX knowledge hehe, maybe I should just ZIP everything and see how much space that leaves me :)

JeffrySG
02-27-2011, 11:48 AM
@ArtGoblin: love the chair! it has a total 1970's retro feel to me! Nice wires too! :D

@Wittywop: very cool entry! love that fuzz!

@XswampyX: the ultimate furry beanbag chair! very nice!

JeffrySG
02-27-2011, 12:30 PM
Well, this Eames chair (http://store.hermanmiller.com/store/servlet/dynamicKit__10151_-1_10051_1373) has always been one of my favorite designs. There's a nice little story about the design of the chair on that link too.

I went a bit over the hour for the modeling tweaking the final shape and placing the screws and connectors - I'm at 70min or so. I then had about 2hrs on the uv unwraping and texturing/lighting on the scene. I ended up using uv spider to get the edges unwrapped. I'm looking forward to decent uv tools in LW eventually! The wood is from a photo texture that I adjusted the color to match one of the veneer options and I just hand drew the plywood profile texture as I couldn't find any good photo references of the side of plywood.

93185 93186

93187 93188

COBRASoft
02-27-2011, 01:10 PM
JeffrySG: this chair would make a nice tutorial, from start to finished image :).

XswampyX
02-27-2011, 04:16 PM
More wires, not the most exciting but....

http://i465.photobucket.com/albums/rr16/xXswampyXx/BeanBagWired.jpg

@Artgoblin : I think the chairs looked good enough without taking them over to ZBrush. :thumbsup:

@JeffrySG : Fantastic, I want to pick them up and bang 'em on the floor to see how tough they are! Can you tell me what size the wood texture you used was, please? Ta.

JeffrySG
02-27-2011, 04:52 PM
Thanks guys! :)

The main wood texture was 2048x2048 but I had all of the UV maps for all of the parts on that one UV map (two legs, center, seat and back). The edges were on separate maps because I used uv spider and it was just easier to do it that way.

here's the uv layout:
93193

Iain
02-27-2011, 05:22 PM
Lovely model and render Jeffry :thumbsup:

Great work all round actually!

ch.schrul
02-28-2011, 06:32 AM
Hi all!

My first speed model: the napoleon chair

Modeling took me total 80 minutes (I had to restart with the model two times). I have to say, without the excessive use of LWCAD it wheren't possible for me to model this chair in such a short time.

Texturing of the chair took me around 2 minutes (simple metal- material)

Scene setup took around 1 minute. It's a scene- setup I've created a few months ago. I just threw the two chairs in it.

Rendering was made in fry. Took around 12 hours.

Cheers,
Chris

JeffrySG
02-28-2011, 07:08 AM
Lovely model and render Jeffry :thumbsup:

Great work all round actually!

Thanks, Iain. :)


@ch.schrul: nice job on the metal chair! The scene looks really nice too. Welcome to the challenges! :D

ch.schrul
02-28-2011, 07:20 AM
Thanks, Iain. :)


@ch.schrul: nice job on the metal chair! The scene looks really nice too. Welcome to the challenges! :D

:) Thank you Jeffry!
Great idea for the challange!

COBRASoft
02-28-2011, 10:09 AM
Nice one ch.schrul and welcome to the challenges.

You guys are giving me a hard time to judge :)!

ch.schrul
02-28-2011, 01:50 PM
Thanks COBRASoft! :)

R.Feeney
02-28-2011, 02:23 PM
Seriously good work guys :thumbsup:
Still hoping to get something done for this one myself

R.Feeney
02-28-2011, 07:38 PM
Finally found a chance to get something done..
An office chair and a Wiggle Chair from the 70`s.
One about 45 min and the other about 5. Guess which one took longer:hey:

oliversimonnet
02-28-2011, 07:46 PM
aaah nice chair's
love the twisty one :)
nice work

Iain
03-01-2011, 01:57 AM
Good to see you back, Richard.

A chair by the great Jens Risom. This kind of stuff is currently enjoying a bit of a deserved revival thanks mainly to Mad Men.
Full hour for modelling but I could've done with another 15 minutes for fabric bumps and folds.

JeffrySG
03-01-2011, 09:48 AM
Great new chairs (models / renders) Richard and Iain! Love the fabric texture on that one, Iain. All of these great retro designs are making me want to go out and buy a cool vintage chair! If I can only find a few thousand dollars in the street somewhere first! ;)

Iain
03-01-2011, 10:19 AM
Thanks Jeff.
Thought I'd take FPrime out for a whirl..............

COBRASoft
03-01-2011, 11:55 AM
Richard: as Iain said, great to see your work in here again. Nice job!

Iain: very nice model.

1 day left people :)...

speismonqui
03-01-2011, 01:38 PM
Thanks Jeff.
Thought I'd take FPrime out for a whirl..............

FPrime ah?
sure it looks beautifull! amazing plugin, just love it, maybe i'll get a FPrime tattoo :D like a bit noisy tribal or something :D
I'll miss it

JeffrySG
03-01-2011, 01:53 PM
Thanks Jeff.
Thought I'd take FPrime out for a whirl..............

Looking nice!! I think I prefer the LW render though. It's interesting how different the fabric looks in each of the renders (lw/fp).

COBRASoft
03-01-2011, 02:52 PM
Hi,

I wanted to model another chair which is healthy for the back. Unfortunately, it took me almost 2 hours to complete (shame on me). I'll add a render later.

Greetings,
Sigurd

JeffrySG
03-01-2011, 03:13 PM
Hi,

I wanted to model another chair which is healthy for the back. Unfortunately, it took me almost 2 hours to complete (shame on me). I'll add a render later.

Greetings,
Sigurd

That came out really nice. My friend had one growing up. I used to love sitting on it - but not for too long. It hurt my shins after a while. lol

Iain
03-01-2011, 03:15 PM
Looking nice!! I think I prefer the LW render though. It's interesting how different the fabric looks in each of the renders (lw/fp).

Yep - its the subtle differences that always intrigue me. LWs Interpolated radiosity is fast and powerful but FPrime picks out contact shadows and details that LW would take a week to calculate (and all without piling on Ambient Occlusion shaders etc, etc.)

I think it'll always have a place on my hard drive :)

COBRASoft
03-01-2011, 06:37 PM
Thanks JeffrySG.

Here's the render of the chair.

R.Feeney
03-01-2011, 07:26 PM
An Art Deco Styled armchair, stuck into a room from a previous challenge.

Cool stuff Iain & COBRASoft

Oedo 808
03-01-2011, 08:34 PM
A lot of really nice work this week. Good to see a strong Challenge like this one, especially with slacking bums like me. Been a while since I put in an entry, I think I might enter more if I make the model sooner, and then render later, I'm sure I've modelled entries before and not bothered because I didn't get around to a render. And even though it's no longer a requirement, I wouldn't bother without one.

Drifted just over the time limit, wasn't feeling enthusiastic enough to stop myself.

9325693257

JeffrySG
03-01-2011, 09:40 PM
Great renders COBRASoft, R.Feeney and Odeo 808! :D

probiner
03-01-2011, 10:32 PM
So ppl gave speed modelling challange a chair... and did it sit? NOOO, it went running :D Great! Nice entries everyone.

It's late here and tommorow i'll probably redo this one again better, specially the rubber bands, but it was to proof the concept i've drawn.. Modeling and Rigging took 30 minutes.

Will accept tips for rubber band texturing (Using Simple Skin for now!) and for the rubber band dynamics (Since this is rigged paper clips are flexibe, i'm gonna make it opening, on chair position, on chaise longue, etc. :D)


Great to see Richard back and sitting, i mean kicking =)

OnlineRender
03-02-2011, 01:04 AM
About 4 false starts and this is all I could manage in an hour . . . " I will continue to work on the rest later today or tomorrow " I don't care what anybody says , this is the freak'in best chair EVER . . .

Joe90

http://img14.imageshack.us/img14/7935/joe90j.jpg

http://ecx.images-amazon.com/images/I/513QZ31BCHL._SL500_AA300_.jpg

http://www.youtube.com/watch?v=IW5Ig49sVa4
JOE 90-Ep1 Pt1- Most Special Agent

djlithium
03-02-2011, 01:43 AM
A lot of really nice work this week. Good to see a strong Challenge like this one, especially with slacking bums like me. Been a while since I put in an entry, I think I might enter more if I make the model sooner, and then render later, I'm sure I've modelled entries before and not bothered because I didn't get around to a render. And even though it's no longer a requirement, I wouldn't bother without one.

Drifted just over the time limit, wasn't feeling enthusiastic enough to stop myself.

9325693257

Wow! Love the chair. That's really sweet. Some other great models in here.
You guys kill me when it comes to modeling. =^..^= I just don't have the patience I guess.

Oedo 808
03-02-2011, 06:50 AM
Great renders COBRASoft, R.Feeney and Odeo 808! :D

Thanks JeffyrSG! :P


Wow! Love the chair. That's really sweet. Some other great models in here.
You guys kill me when it comes to modeling. =^..^= I just don't have the patience I guess.

Thanks man, I'm with you on the patience for the most part, for me it's not the modelling that's the killer, that's why the time limit is great for someone like me who would otherwise over-think things and procrastinate in general. But it's having to do a render too where I do all of that, and it's not something I'm very hot on.

COBRASoft
03-02-2011, 08:01 AM
Thx JeffrySG!

For me the renders also take the most time. Actually it's the surfacing that kills me. UV maps are an evil dark thing to me, so I try to get around without it. That UV map JeffrySG made with UV Spider (or so) looks amazing as does the result.

But that's part of these modeling challenges IMO, you learn more than just modeling because renders really make a model come to live.

OnlineRender
03-02-2011, 08:52 AM
its now WIP

http://img69.imageshack.us/img69/1167/joe90s.jpg

Iain
03-02-2011, 11:00 AM
Cracking Joe 90 chair Onlinerender.:thumbsup:

Great response this week. Simple is always best.

Oedo 808
03-02-2011, 01:27 PM
Joe 90, that's gotta be the Funkiest choice of chair, be cool to see it finished.

Though I really want one of Richard's Deco chairs, those are very much to my liking. Ha, I used to hate art deco :stumped:

COBRASoft
03-02-2011, 02:32 PM
Iain: Yes, it's nice to see there is still a lot of interest in the challenges.

I'll pick a winner tomorrow, it won't be easy, that's for sure!

HRGiger: you're up for # 110, I hope you didn't forget. Otherwise I hope somebody else will find a nice challenge and post it by tomorrow.

COBRASoft
03-02-2011, 02:35 PM
Oh yes, don't forget to post your wires :).

JeffrySG
03-02-2011, 02:40 PM
Cracking Joe 90 chair Onlinerender.:thumbsup:

Great response this week. Simple is always best.

Agreed on both points!

I also think the 'chair' topic is one of those perfect subjects for the challenges. Useful, tons of options, not too complicated , etc!

IgnusFast
03-02-2011, 09:18 PM
Good LORD! This is easily one of the strongest challenges I've seen! Simply gorgeous entries - glad I'm not judging this....

colkai
03-03-2011, 04:06 AM
its now WIP

He11 Yeah! :thumbsup:


(He who has a Joe 90 car on his windowsill) :)

OnlineRender
03-03-2011, 06:19 AM
He11 Yeah! :thumbsup:


(He who has a Joe 90 car on his windowsill) :)

I am going to model the whole set , some of it's generic and symmetrical so I can save some time on that aspect ,only draw back being there is not much reference footage other than the episodes on YT and unfortunately I do not have a betamax player for my tapes :)

I don't want to turn it into a realistic or modern take , I like contemporaneousness :)

keep that late 60's feel .

{scale is a little bit meh}

COBRASoft
03-03-2011, 04:45 PM
Hi all,

Damn, choosing the winner is difficult, certainly with all these nice entries this week. I'm very happy with the variations of chairs provided, this was the intention of the challenge.

I'll try to give a personal comment by every entry:

- Purple chair from 1080p: nice design, perhaps next time show the wires from modeler and not Layout (tripled). Flashy color, although purple is not my thing ;).
- Praying chair from chco2: let's pray! Simple and effective wires, nice wood texture.
- 'Simple' chair from Amurrell: the bend at the back seems a bit too short, perhaps smoothing it a little would make the chair more comfortable. Nice first entry though.
- Future work chair from oliversimonnet: when can I order one of these? Looks quite comfortable too. Great to see it got its own thread with further improvements.
- Office meeting chair from Iain: strong design, wires are very optimal and render is outstanding. Still love your wood textures man.
- 'Hard life' chair from XswampyX: poor chair, I hope it gets some paint soon :). Exceptional wires, excellent render.
- 'Captain Kirk' chair from chco2: this brings back nice movie memories. Wires are ok, although the sitting could use some band glue IMO.
- Falcon chair from ArtGoblin: even without ZBrush this model looks great, so do the wires. Welcome to the challenges too.
- 'Old' chair from Wittywop: effective design and wires. The Surface Tester Scene has a nice light setup, I should try this once for myself.
- 'Bag' chair from XswampyX': FFX can deliver nice results, good to know. Wires look great and so does the render.
- Eames Molded Plywood Lounge Chair from JeffrySG: as asked before, make a tutorial about this chair from start to finish. Slim design, elegant wires and topnotch render.
- Napoleon chair from ch.schrul: nice quality first entry. Wires are smooth and renders are great. I'm afraid that chair would break if I would sit on it though.
- Wiggle and Office chair from R.Feeney: I've never seen such a wiggle chair but it looks funny to me. The office chair looks great. Wires are your usual quality :).
- Jens Risom chair from Iain: looks very comfortable to me. Wires could use some cleaning up, but 60 minutes is a short time for such a complex chair. Great job.
- Art Deco chair from R.Feeney: classy design and render.
- Office chair from Oedo808: stylish design and nice render. You have to admit that renders make the model come out more and show the detail better than wires.
- Paperclip chair from probiner: great idea, render and wires! Would love to see the next version with the rubber bands.
- Joe90 from OnlineRender: classic and nicely done! Great to see it's WIP now, will certainly follow the progress. Pitty that the wires are missing :(.

So, that are all the entries (I hope). We got some new faces and some old ones returning after long absence to the challenges. Thank you!

And the winner is... I could pick 3 or 4 winners with ease, but there can be only 1 so:

- 3rd place: 'Hard Life' chair from XswampyX. 30 mins, really? That render really rocks.
- 2nd place: Napoleon chair from ch.schrul. Normally disqualified due to the 80 mins, but I had to place it in my top 3 :).
- 1st place: Falcon chair from ArtGoblin. Great wires (non ZBrush version). Congratulations !

Greetings,
Sigurd

R.Feeney
03-03-2011, 05:27 PM
Well done ArtGoblin:thumbsup:

oliversimonnet
03-03-2011, 05:59 PM
congrats ArtGoblin.
and nice job everyone else too :)

Oedo 808
03-03-2011, 07:21 PM
It was nice to see such a healthy Challenge.

Bravo ArtGoblin :thumbsup:

probiner
03-03-2011, 08:56 PM
Congratz ArtGoblin, Nice handling of the challenge Cobrasoft, great to see the challanges back up. HRGiger... bring it on...

JeffrySG
03-03-2011, 11:16 PM
Congrats AG! I was really glad I had the time for this one. Really fun and it was great seeing all of the amazing entries from everyone!!

OnlineRender
03-04-2011, 01:12 AM
- Joe90 from OnlineRender: classic and nicely done! Great to see it's WIP now, will certainly follow the progress. Pitty that the wires are missing :(.


ma bad ............ here is another wip and wires "shamed" and "hides" :) could do with some bandglue love

http://img806.imageshack.us/img806/6175/joe901.jpg

http://img828.imageshack.us/img828/8909/joe902.jpg

Congrats Artgoblin ,stunning work from all . . . as expected :)

cresshead
03-04-2011, 01:33 AM
joe 90 AWESMe-NESS!

ch.schrul
03-04-2011, 07:13 AM
Great work ArtGoblin! Congratulation!
Cobrasoft, you did a great job with the challange! :thumbsup:

OnlineRender
03-04-2011, 02:36 PM
http://img15.imageshack.us/img15/8909/joe902.jpgcan't be bothered to make a new thread :rock:

probiner
03-04-2011, 05:18 PM
That thing remind me to much of the Francis Bacon Pope
http://blog.uncovering.org/archives/uploads/2008/08060103_blog.uncovering.org_ospapas.jpg
http://www.ugallery.com/blog/image.axd?picture=2010/10/471px-Study_after_Velazquez's_Portrait_of_Pope_Innocent_ X.jpg

chco2
03-05-2011, 04:04 AM
Congrats AG!

And uhmm Next challenge ?

COBRASoft
03-05-2011, 04:37 AM
It seems HRGiger has forgotten it :(.

I'll start a new, short challenge so ArtGoblin can start his challenge #111 Wednesday. I hope everybody is ok with that.

COBRASoft
03-05-2011, 04:44 AM
New challenge is here (http://www.newtek.com/forums/showthread.php?t=117473).

ArtGoblin
03-05-2011, 11:16 AM
UUUUuuuhhh sweet I won ?!? I'm honored ! This speed model challenge has been a really fun one... so many awesome entries from everyone :)

I'm going to have to think hard to find a modelling subject that will get everyone as enthusiastic about it as this one

COBRASoft
03-05-2011, 11:35 AM
ArtGoblin: Simplicity seems the key :).