PDA

View Full Version : Lathe Scaling missing



czesiu
09-07-2003, 07:09 AM
Hi Forum,

Recently I have discovered that ther is no Scaling in Lathe tool.
There is neither possible to increase/decrease Start/End angle using the Arows button and mouse.

Example:

It is impossible to create Conical shapes like conical spring,
se Pic1.
It is impossible to create the nd of cylindrical spring, se Pic1.

It is impossible to decide offset and then adjust Start/End angle to se how it will look.

I request the updating of Lathe tool.

Cheers
Pawel C

jb_gfx
09-07-2003, 08:06 AM
To create this kind of shape you can:

1. Make 1 pts polys

2. Use the lathe tool with an offest and enough sections to create the spring

3. You get a spring made of a 2 points chains, now use the Taper tool to change the size on 1 side like you want

4. Kill all the polys, lasso select the points, create a spline

Now you can use this spline with a circle shaped poly (or what you want) as an extrusion path.

This way you get much more control than with the lathe tool only.

Karmacop
09-07-2003, 09:28 AM
I agree with czesiu. That sort of thing can't be too hard to add.