PDA

View Full Version : Live Control LC-11



BobN
02-19-2010, 06:10 AM
Hello,

We have a studio that we are using a VT 5 and Live Control LC-11. Each studio;s cameras are controlled by the Live control. I am trying to figure out a way to all red "on air" lights to the cameras that are controlled by the Control. Anybody know how?

Matt Drabick
02-19-2010, 07:48 AM
You need to connect a tally light solution . . . . this is available and can be done. Call me at 919-790-5488. Need to know more about your video cameras, CCUs, etc. I build VT[5] systems and support them.

Where in Virginia are you?

Matt Drabick,
DigiTek Systems (NewTek Elite Partner)
Raleigh, NC

Zane Condren
02-19-2010, 07:56 AM
So you want Tally Lights? Tally has nothing to do with the LC11, the VT5 has a standard Tally GPI connector on the SX84. If you have Camera's that already have tally Lights and CCU's intergrating them to the SX84 is pretty simple. If you need Tally Lights and everything your best bet is to call your dealer.

BobN
02-19-2010, 09:09 AM
So you want Tally Lights? Tally has nothing to do with the LC11, the VT5 has a standard Tally GPI connector on the SX84. If you have Camera's that already have tally Lights and CCU's intergrating them to the SX84 is pretty simple. If you need Tally Lights and everything your best bet is to call your dealer.

What we need are lights that tell the interviewer and their guests which camera's on not the camera operators. We use 3 cameras per set and they are fixed on tripods.

PIZAZZ
02-19-2010, 09:45 AM
Tally lights are still what you need.
We have kits with the needed relays and the camera tally light that can either be for the On Camera Talent and/or the Camera Operator.

Shoot me an email and we can fix you up quickly. We have done many many many kits like this.

jef at pizazzme dot com

Zane Condren
02-19-2010, 10:55 AM
I was just going to suggest you contact Jef...

BobN
02-19-2010, 01:44 PM
We have Sony PD 170's and PD 150's

tedkazm
02-19-2010, 07:18 PM
Visit www.tally-lights.com

I have a controller for the VT-5 and tally lights. You must have the SX-84 attached to VT-5 to make the tally lights work.