PDA

View Full Version : Free Speed Models



Pages : [1] 2 3

R.Feeney
08-27-2009, 07:26 AM
I have done a lot of models for the speed modeling challenges and they are dong no good just sitting on my hard drive. So I am going to give most of them away.
The only thing I ask is don't try to sell any of these models. You can use them in your renders commercial or not, you can take them apart, rebuild them or anything else you want.

Most of them could honestly do with more work.

First up is an airship from the transportation challenge.
http://forums.newtek.com/attachment.php?attachmentid=68456&d=1232502655

Any one else wants to join in with your freebies, more than welcome.:lwicon:

R.Feeney
08-27-2009, 07:29 AM
And an alarm clock
http://forums.newtek.com/attachment.php?attachmentid=70226&d=1235514241

I am always forgetting to build to scale so a lot of these might need to be resized

R.Feeney
08-27-2009, 07:31 AM
A strange wheely Alien
http://forums.newtek.com/attachment.php?attachmentid=62959&d=1220835330
More to come, I have to step out for a while.

R.Feeney
08-27-2009, 07:40 AM
Time for one more quick one
A Garden Bench
http://forums.newtek.com/attachment.php?attachmentid=73771&d=1243204565

probiner
08-27-2009, 08:12 AM
You'r great Feeney. Already learned a lot from your models and scenes you share with us,
Thank You

littlewaves
08-27-2009, 08:38 AM
very generous of you Mr. Feeney. Thanks

R.Feeney
08-27-2009, 08:48 AM
Thanks guys, I have around 50 or 60 models\scenes that I want to give away so it might take a while. And call me Richard please :D
A bin.
http://forums.newtek.com/attachment.php?attachmentid=69622&d=1234294140

R.Feeney
08-27-2009, 08:51 AM
Bouncing Bomb (http://en.wikipedia.org/wiki/Bouncing_bomb)
http://forums.newtek.com/attachment.php?attachmentid=75789&d=1248872705

R.Feeney
08-27-2009, 08:58 AM
A Chalice from the Container Challenge.
This one will need a HDRI in Image world for the reflections. I removed it from the archive, was a bit huge otherwise

http://forums.newtek.com/attachment.php?attachmentid=69492&d=1234051188

flakester
08-27-2009, 09:22 AM
What can I say?

Great thing to do there R.Feeney, very generous indeed. In the words of the youth of today; you da man.

:thumbsup:

--
flakester

R.Feeney
08-27-2009, 10:34 AM
Flakester Thanks and in the further writings of the youth "Doin it for the Lolz" :D damn I`m too old to carry that off


A pocket compass. From "It goes in your pocket"
http://forums.newtek.com/attachment.php?attachmentid=74191&d=1244506851

R.Feeney
08-27-2009, 10:40 AM
A Crossbow from the "Medieval Weapons Challenge" On of the older ones:hey: and it shows
http://forums.newtek.com/attachment.php?attachmentid=62603&d=1220136007

art
08-27-2009, 10:41 AM
Thank you! And the scenes included too. :thumbsup:
I'll learn a thing or dozen from these models and scenes. :)

R.Feeney
08-27-2009, 10:46 AM
I hope they are of some use to you even if its only how not to do it. Some of them are a bit ridiculous on render time, I have a tendency to render while I sleep so I dont mind the longer times.

daforum
08-27-2009, 10:52 AM
Feeny, the models are great, and so is your generosity.

Thank you.

Glendalough
08-27-2009, 11:02 AM
A lot of nice work here! Some of the renders look pretty good quality, well worth the time.

IgnusFast
08-27-2009, 11:46 AM
That's awesome, man! Makes me glad I'd released the entries I'd done as well.

R.Feeney
08-27-2009, 12:06 PM
Thanks for the encouragement guys:thumbsup:

A set of Crutches from #32: Daily Routine, I use a pair just like these to get around. Could do with a bit of clean-up around the holes in the shaft
http://forums.newtek.com/attachment.php?attachmentid=72026&d=1238895644

IgnusFast if you want to post them up here too feel free.

R.Feeney
08-27-2009, 05:05 PM
From "Communications" a Crystal ball
http://forums.newtek.com/attachment.php?attachmentid=76326&d=1250370013

R.Feeney
08-27-2009, 05:08 PM
A cutting torch from #50 - fire

http://forums.newtek.com/attachment.php?attachmentid=76191&d=1250018693

Now thats A through C done. More tomorrow including (better hide behind the couch) a Dalek

mikala
08-27-2009, 08:06 PM
That cutting torch render is beautiful.
Thanks for your generosity.

R.Feeney
08-28-2009, 05:37 AM
That cutting torch render is beautiful.
Thanks for your generosity.

Thank you and you are welcome :thumbsup:

http://forums.newtek.com/attachment.php?attachmentid=75442&d=1248143353
A Dalek like thingy from the sci-fi icons challenge.
Not 100% accurate or anything but for 60 min of modeling I was happy.

R.Feeney
08-28-2009, 05:41 AM
http://forums.newtek.com/attachment.php?attachmentid=61994&d=1219186491
I think this was the first model I did for the first Speed Modeling Challenge.
Its a bit rough, really rough in fact.

A Dart watch from the "007 Gadgets" challenge

R.Feeney
08-28-2009, 05:47 AM
http://forums.newtek.com/attachment.php?attachmentid=73780&d=1243249781
A deck chair & umbrella from the "sit on it outdoors" challenge
Including as a bonus a photo of mine from a local beach (Silver Strand, Galway) at sunset for a background plate

R.Feeney
08-28-2009, 05:55 AM
http://forums.newtek.com/attachment.php?attachmentid=75276&d=1247685006
An Art Deco style coffee set.
From as you might guess the Art Deco challenge.
__________________________

Please feel free to join in, add a model, a texture, a rigging setup or anything else you can.
Good bad or indifferent I would love to see them.

R.Feeney
08-28-2009, 06:00 AM
http://forums.newtek.com/attachment.php?attachmentid=75181&d=1247511650
A deco style radio, inspired by a computer case I saw a photo of.
From the Art Deco Challenge.

Time for a break again, the is a speed modeling challenge (http://www.newtek.com/forums/showthread.php?t=101457) going on right now that I need to get an entry or three done for.

R.Feeney
08-28-2009, 06:15 PM
http://forums.newtek.com/attachment.php?attachmentid=75037&d=1247093647
Just the table/desk, the lamp is not included i`m afraid.
From the Art Deco Challenge

R.Feeney
08-28-2009, 06:20 PM
http://forums.newtek.com/attachment.php?attachmentid=70732&d=1236453564
From the Food, glorious food challenge, the fish texture is not included either unfortunately.

mikala
08-28-2009, 06:31 PM
Very nice work on the trout!

R.Feeney
08-28-2009, 06:57 PM
Thanks :)

R.Feeney
08-29-2009, 07:32 AM
http://forums.newtek.com/attachment.php?attachmentid=62921&d=1220744692
An"other" fish this time from the cartoon character modeling challenge.*

Probably needs a HDRI for the reflections.

*Batteries not included (but the Bowl is)

R.Feeney
08-29-2009, 07:35 AM
http://forums.newtek.com/attachment.php?attachmentid=71044&d=1236989594
A fondue set from the 70`s challenge.
Again needs HDRI for reflections.

probiner
08-29-2009, 07:48 AM
Richard...
Oh man all so good...
Thank you again... Im gonna link this page everywhere =)

R.Feeney
08-29-2009, 08:00 AM
You are still welcome :D

I just did a couple of vids too.
one building a lamp of sorts http://www.vimeo.com/6326976

and another thats more of a quick tutorial on adding a circular section to a subpatch surface using an 8 sided disk as a template
http://www.vimeo.com/6327814

R.Feeney
08-29-2009, 08:04 AM
http://forums.newtek.com/attachment.php?attachmentid=70848&d=1236652221

The model is a bit unfinished but the surface might be of use, it will probably look a bit different under other lights though.

From the food glorious food challenge

R.Feeney
08-29-2009, 08:09 AM
http://forums.newtek.com/attachment.php?attachmentid=69441&d=1233951728
Another from the Containers Challenge
The strange Glass ball table is in there too I think.

R.Feeney
08-29-2009, 08:12 AM
Well thats 24 so far and I think about 30 more to go, at least until I build more :D

If you do link to these please link to the thread rather than individual models. And Let me know too

probiner
08-29-2009, 08:32 AM
sure i linked to the thread.

http://forums.cgsociety.org/showthread.php?f=5&t=800992
http://www.nurbsandpolys.com/forums/showthread.php?t=358

R.Feeney
08-29-2009, 08:35 AM
Thanks man

bassmanjam
08-29-2009, 01:38 PM
Thanks for sharing!

R.Feeney
08-29-2009, 01:50 PM
Thanks for sharing!

No bother:thumbsup:

http://forums.newtek.com/attachment.php?attachmentid=71112&d=1237149497
A Lightsaber for the 70`s challenge

R.Feeney
08-29-2009, 01:53 PM
I may have lost mine but
http://forums.newtek.com/attachment.php?attachmentid=74163&d=1244426501
Here are some marbles from #41 - It Goes In Your Pocket

dbigers
08-29-2009, 04:42 PM
I dont see an immediate use for any of these, but wanted to thank you for you generosity all the same.

Looking through these, one can see the value of the speed modeling challenges. Thanks again!!

robster
08-29-2009, 09:29 PM
Wow, these are great! Thank you for being so generous and sharing with all of us. Impressive work and I'm sure I'll learn something!

R.Feeney
08-30-2009, 11:25 AM
Feeling stressed?
Have a Martini :hey:
http://forums.newtek.com/attachment.php?attachmentid=70788&d=1236543701
With 3 Olives from the Food Glorious Food Challenge.

Thanks for your comments guys:thumbsup:

R.Feeney
08-30-2009, 11:28 AM
Can we talk.
Almost :D
http://forums.newtek.com/attachment.php?attachmentid=76296&d=1250329071
-- --- .-. ... . -.-. --- -.. . -.- . -.--
A Morse-code key from "Communications"

R.Feeney
08-30-2009, 11:38 AM
If life is grinding you down...
Grind back.
http://forums.newtek.com/attachment.php?attachmentid=62359&d=1219798327
Another very early one from the 2nd challenge.
A Mortar & Pestle.

R.Feeney
08-30-2009, 12:40 PM
http://forums.newtek.com/attachment.php?attachmentid=75998&d=1249491657
Turned out a bit more cartoony than intended. Buzzzzz
From the "Its Life!" Challenge a mosquito

R.Feeney
08-30-2009, 03:07 PM
http://forums.newtek.com/attachment.php?attachmentid=62814&d=1220576025
One more from the very early days, this one is ment to be cartoony :D
A mouse, not in a house, nor does he have a louse.

Needs more work

R.Feeney
08-30-2009, 03:11 PM
If you are going to have a mouse you will need to leave some food around for him.
http://forums.newtek.com/attachment.php?attachmentid=70709&d=1236390712
Muffin Knife and plate from that food challenge again.
If you dial down the displacement on the muffin a little, more chocolate chips should be visible.

R.Feeney
08-31-2009, 05:37 AM
From #30-Careful, It Could Kill You!!
http://forums.newtek.com/attachment.php?attachmentid=71480&d=1237930038
Some mushrooms and the little set they are in

R.Feeney
08-31-2009, 07:41 AM
http://forums.newtek.com/attachment.php?attachmentid=69051&d=1233433829

From The CORE challenge, in this case based loosely on the central core of a nuclear reactor.

COBRASoft
08-31-2009, 09:49 AM
Richard... You know it already :)

Thanks man. I'll learn even more now.

COBRASoft
08-31-2009, 10:06 AM
This is probably the only model I have that's good enough to share. Everything should be in the zipfile (scene, objects, textures and images).

Greetings,
Sigurd

beverins
08-31-2009, 10:16 AM
You are a hero among men. Thank you so much for your generosity. :D

R.Feeney
08-31-2009, 10:19 AM
Thanks Sigurd, and especially for joining in :thumbsup:
I really appreciate it

R.Feeney
08-31-2009, 05:44 PM
http://forums.newtek.com/attachment.php?attachmentid=75835&d=1248987570
Tentacles!!!

:D An Octopus from the It Lives!! Challenge

R.Feeney
09-01-2009, 07:29 AM
http://forums.newtek.com/attachment.php?attachmentid=76050&d=1249650856
From the Fire Challenge an oil lamp

R.Feeney
09-01-2009, 07:32 AM
From the SCIFI icons a Babylon5 PPG and earthforce badge
http://forums.newtek.com/attachment.php?attachmentid=75350&d=1247824721

Ah Babylon 5 probably the main reason I go interested in 3D.

R.Feeney
09-01-2009, 07:34 AM
One more from the Core Challenge.
http://forums.newtek.com/attachment.php?attachmentid=69133&d=1233524197
Push that button.
I`m a born button pusher me..

R.Feeney
09-01-2009, 07:37 AM
Nevermind.

mike_stening
09-01-2009, 08:24 AM
very nice of you richard.
cant see a use for these yet but you never know. interested to see some of your setups :thumbsup:

daforum
09-01-2009, 12:44 PM
Your models and renders are so cool. I have got a favourite out the ones posted so far, but there may be another..........:)

R.Feeney
09-01-2009, 07:23 PM
Thanks for the kind words guys :thumbsup:

So which on is your favorite so far daforum?

Well it looks like there are already more than 2000 downloads between all the models posted so far in less than a week.. wow I didn't expect those kind of numbers. :eek:
Thanks to everyone who had a look.

Riff_Masteroff
09-01-2009, 08:42 PM
For me its an adventure. More than kind words. Very different than my own environment.

At first, I merely looked at your posted models. Then I went to your posted photos on your web site. First up were many fine photos of cats. I thought of cresshead who is now in mourning, his cat having passed away. Then I looked at your nature photos. Wow, you definitely are an artist!

At second, the photos lead me to remember my visit, this summer, to the local folklife festival. It takes place for about two weeks every summer and.... is located outdoors on a large grassy, tree bordered, rectangle surrounded by museums, government buildings and monuments. The streets and such were planned out by a Frenchman long ago.

http://www.festival.si.edu/2009/wales/instrument.aspx

About thirty five people were selected by the Welsh parliament to convey their culture to me & others who attended. Yes, I know Wales is pretty much a different country than Ireland, Galway. But...but...I listened at length to Irish music. Watched a person dance a jig (never saw that before in my life) and spoke, again at length, with a maker of 'Irish' harps. Your photos, viewed two months later, helped round out my perception.

Then, I down loaded some of your models. Wonderful & well done for about an hour of your time. I have had no luck persuading others in this community to make their own rather than purchasing someone else's.

Finally, I simply too interested on how you came to use the same program (Lightwave) that I use? And of course, other than speed modeling, how does it benefit you?
My own 'puter 3d beginnings (towards the end of thread I explain more fully):
http://www.newtek.com/forums/showthread.php?t=98633&highlight=harmonica+box

R.Feeney
09-02-2009, 04:25 PM
No big story I`m afraid. I have as far back as I can remember loved to build models and now the technology allows me to do it with out gluing my fingers together any more :D

I got into Lightwave from hearing about it being used on Babylon 5 mainly. Mind you I didn't even have a computer back then but it did fire up my enthusiasm.

Its only since I started joining in on the speed modeling challenges that I went from occasionally being lucky in getting a good model done to being able to build what I set out to do.
As the saying goes "practice, practice, practice"

R.Feeney
09-02-2009, 04:29 PM
http://forums.newtek.com/attachment.php?attachmentid=76336&d=1250437732
A Radio Telescope from the communications challenge.

mac
09-03-2009, 04:38 PM
Very generous of you Richard, you have talent to be sure. Thank you for the models and if I use them I will be certain to credit you.

kaflinn
09-03-2009, 06:31 PM
You generosity is amazing - I'll learn a lot from these ;)

R.Feeney
09-04-2009, 05:47 AM
From #25 - What goes up, Must come down
A set of scales.
http://forums.newtek.com/attachment.php?attachmentid=69879&d=1234824145

Its a bit meh it places but you gotta balance the good with the bad :D

Thanks again for the comments, it makes it easier to give these away when I know they are helpful to you folks.
### file didnt attach will try again###

R.Feeney
09-04-2009, 05:52 AM
It goes Boom!!
http://forums.newtek.com/attachment.php?attachmentid=75648&d=1248470466

A "Hollywood" sea-mine from #48 - Explosives

R.Feeney
09-04-2009, 05:57 AM
I may (read probably) have forgottrn to actualy press upload for the scales file. So here we go again

R.Feeney
09-04-2009, 06:00 AM
http://forums.newtek.com/attachment.php?attachmentid=68281&d=1232081031
From the transportation challenge, I cant recall if the little driver guy is included. I have only had the one coffee so far today:D

R.Feeney
09-04-2009, 12:40 PM
It goes boom too.
From the explosives challenge
http://forums.newtek.com/attachment.php?attachmentid=75656&d=1248485906

Paul24
09-04-2009, 04:28 PM
http://forums.newtek.com/attachment.php?attachmentid=68281&d=1232081031
From the transportation challenge, I cant recall if the little driver guy is included. I have only had the one coffee so far today:D

Yes the pilot is included as well as a short animation, it's great thanks you very much :thumbsup:

R.Feeney
09-05-2009, 08:48 AM
Thanks man :thumbsup:


http://forums.newtek.com/attachment.php?attachmentid=70097&d=1235322078
Another one from the timepiece challenge
A stopwatch

Complete with a glaring error :D

R.Feeney
09-05-2009, 08:54 AM
And from "The End Of The Garden" a Sundial.
I had to leave out the textures from this one, not mind to distribute..
http://forums.newtek.com/attachment.php?attachmentid=72579&d=1240245110
The sundial should be fairly intact, the projection image for the tree shadow and some leaf images are missing.

R.Feeney
09-05-2009, 09:01 AM
http://forums.newtek.com/attachment.php?attachmentid=70058&d=1235177090
ANother one from the timepiece challenge :hey:
The TARDIS from Dr.Who.
Including a panoramic shot of Canary wharf I took in London last year.

archijam
09-05-2009, 09:04 AM
ANother one from the timepiece challenge :hey:
The TARDIS from Dr.Who.
Including a panoramic shot of Canary wharf I took in London last year.

So good! My fave, but I'm biased :thumbsup:

R.Feeney
09-05-2009, 09:15 AM
Thanks archijam :D

I am running low on models to add here maybe another 10 or 15 left to go, so if anyone wants to join in and add some of their own, please do.
I will be away most of next week, after that I have some half formed plans for a bigger project that should produce some interesting models for here.

R.Feeney
09-05-2009, 04:47 PM
From #42 - My grandma went on vacation


http://forums.newtek.com/attachment.php?attachmentid=74299&d=1244764815
My version of the Hitchhikers Guide :thumbsup:

R.Feeney
09-05-2009, 04:52 PM
And one of my own favorites
From the Villains Lair
http://forums.newtek.com/attachment.php?attachmentid=70431&d=1235907880
Including tables 2 types of chair and the SPECTRE logo.
No Death traps unfortunately

kojean
09-07-2009, 06:48 AM
Richard, thank you for generously sharing so many of your models! Looking through the thread, I was caught up just enjoying the images. I'm sure many of the models will come in handy and be helpful to study. Your videos are appreciated as well.

:thumbsup:

Imagiro
09-07-2009, 07:29 AM
Hello Richard;

Starbase1 posted a link to this forum over at Foundation 3D. You have some nice looking models here. I smiled when I found the "glaring error" on the stopwatch. We've all done something like that, haven't we?

I have downloaded the alarm clock, the chalice and the compass. Thank you kindly for sharing these.

tyrot
09-07-2009, 12:54 PM
dear richard

you just rock mate...You just rock! Thank you...

BEST

toby
09-07-2009, 02:58 PM
Great stuff, Thanks Richard!

R.Feeney
09-07-2009, 05:18 PM
http://forums.newtek.com/attachment.php?attachmentid=75770&d=1248826173
High speed screws in the water from the explosives challenge.
A generic torpedo
________________________

You are all very welcome :thumbsup:
I really appreciate the feedback and I am delighted that they are of use or educational for someone.

R.Feeney
09-07-2009, 05:24 PM
http://forums.newtek.com/attachment.php?attachmentid=71675&d=1238448475
A Warrior bug inspired by the work that Foundation Imaging did for Roughnecks.
From #31- It Came From Outer Space!!!
Changed it a bit from the original design.

toby
09-07-2009, 05:26 PM
I'm gonna re-make that scene in Finding Nemo with the shark, the torpedo and the mines... substituting the octopus for the shark :D

No, not really :) but if I do use anything your name will be plastered all over it!

R.Feeney
09-07-2009, 05:27 PM
http://forums.newtek.com/attachment.php?attachmentid=70165&d=1235433894
A wall clock from the Timepiece challenge.

R.Feeney
09-07-2009, 05:30 PM
I'm gonna re-make that scene in Finding Nemo with the shark, the torpedo and the mines... substituting the octopus for the shark :D

No, not really :) but if I do use anything your name will be plastered all over it!

Cheers man :thumbsup:
http://forums.newtek.com/attachment.php?attachmentid=72153&d=1239095958
A glass of water from #32: Daily Routine
Which leads nicely into the next one :hey:

R.Feeney
09-07-2009, 05:33 PM
http://forums.newtek.com/attachment.php?attachmentid=72075&d=1238983603
A toilet :D
Also from #32: Daily Routine

R.Feeney
09-07-2009, 05:48 PM
http://forums.newtek.com/attachment.php?attachmentid=74100&d=1244168719
Well thats it for now, A to Z
A Zippo lighter from the "it gos in your pocket" challenge.
I am away for the next few days, so behave yourselves while I am gone :devil:

Don't forget there is a new challenge every Wednesday and all are welcome to join, you know you want to :D

colkai
09-08-2009, 02:24 AM
RFeeney,
Not only are you very generous, your renders here stand as a beautiful gallery in their own right. :)

EDIT: If you don't mind, whilst not up to your standard, I may dig out my models and post them up here. :)

R.Feeney
09-08-2009, 03:37 AM
Colkai I would love if you added to our little collection here.
And thank you.

probiner
09-08-2009, 05:04 AM
RFeeney,
Not only are you very generous, your renders here stand as a beautiful gallery in their own right. :)

EDIT: If you don't mind, whilst not up to your standard, I may dig out my models and post them up here. :)

:thumbsup:

daforum
09-08-2009, 10:30 AM
You guys are so generous, thank you. :)

Twisted_Pixel
09-08-2009, 12:58 PM
Thanks for sharing your work and taking the time to upload it all.

IMI
09-09-2009, 07:15 AM
That's very very generous of you R.Feeney, thank you! :)

Kuzey
09-10-2009, 04:07 PM
Here's a couple from me, rendered in TNGViewer...grab them from my blog.

Kuzey

OnlineRender
09-10-2009, 06:51 PM
Please SOMEONE grab these files and archive them , then post a link-age to NT youtube account .....damn

OnlineRender
09-10-2009, 06:52 PM
http://forums.newtek.com/attachment.php?attachmentid=74100&d=1244168719


thats a crackin RENDER

R.Feeney
09-12-2009, 05:46 AM
Back from my few days away, the weather was great by the way :D
http://forums.newtek.com/attachment.php?attachmentid=75912&stc=1&thumb=1&d=1249228882 (http://forums.newtek.com/attachment.php?attachmentid=75912&d=1249228882)
The Unfinished Pig (sounds like something you could hang in a gallery)
From the It lives challenge.

Thanks for joining in Kuzey :thumbsup:

And everyone else for the nice comments.

colkai
09-12-2009, 06:48 AM
Ok,
Had to take the car in for a service today, so, as you do, I took my lappy to bundle up my speed models. :p

Now I am the first to admit, they are not of the quality of Richards work, but if y'all want to, you're welcome to them.
As Richard has said, so for me, feel free to do with them what you will, but if you do use them in a commercial manner, (not likely I know ;) ), please acknowledge them as my work.

So, first off, a Toy Train and toy car.

EDIT: Forgot to mention.
Files require WinRar 3.80 or above.
Some archvs have had HDR Images removed to save space, some also require the SiBL plugin / HRD images (those that do mention so in the RAR comment).

colkai
09-12-2009, 06:50 AM
Drill bitbrace and barrels

colkai
09-12-2009, 07:01 AM
Microwave and tupperware

colkai
09-12-2009, 07:13 AM
Jewels and Chino vases.

R.Feeney
09-12-2009, 07:16 AM
http://forums.newtek.com/attachment.php?attachmentid=75911&stc=1&thumb=1&d=1249228866 (http://forums.newtek.com/attachment.php?attachmentid=75911&d=1249228866)
And from the same place as the piggy, an unfinished penguin.

Big thanks to colkai for these great models that he is giving away too. :bowdown:

colkai
09-12-2009, 07:29 AM
Street Bin and Hay barn.

(Gawd, this would be a lot faster if my gorramn internet connection would stay up longer than 30 seconds at a time today!) :(

..wot a pratt, meant to make the images jpg's - no wonder they are taking so long to load up! :bangwall:

colkai
09-12-2009, 07:33 AM
Dog bowl / water bowl & water clock

colkai
09-12-2009, 07:35 AM
Original mobile and a deck chair

colkai
09-12-2009, 07:37 AM
Eggs and a candle to eat 'em by :p

colkai
09-12-2009, 07:39 AM
Ok, running out of ways to tie these together now and approaching the "WTF use is that?" models soon. :)

Tanker and skateboard.

colkai
09-12-2009, 07:41 AM
Tooth mirror and hairbrushes.

(clinging desperately to themes now...)

I know it's hard to believe, but really, most of that size of the hairbrush file is geometry! :p

colkai
09-12-2009, 07:49 AM
Shield and halberd (incl. spear object too in halberd RAR file).

R.Feeney
09-12-2009, 07:50 AM
Your a machine man colkai :D

colkai
09-12-2009, 07:51 AM
Ok, I give up now, label the next lot "oddities" :)

colkai
09-12-2009, 07:52 AM
Something to carry them in maybe...

colkai
09-12-2009, 07:54 AM
Final two, wierd and downright useless :D :D

colkai
09-12-2009, 07:55 AM
Oops, seems I was wrong... this is the last one :)

PHEW! - hope someone finds 'em useful, time for a coffee methinks! (with mayhap, a touch of Armagnac X.O. to fortify myself dontcha' know? :D )

probiner
09-12-2009, 08:02 AM
Checking them out colkai:thumbsup:
Thanks.

This sould be a sticky where ppl could post their random models ans scenes they would like to share.

Cheers

OnlineRender
09-12-2009, 10:47 AM
excellent work , some damn nice models / scenes. " Admin any possibility we can archive the files and host them somewhere .prefferable next to textures section . ofcourse with permission of the members , would be sweet to go onto a 3D website with some real class free models.

R.Feeney
09-12-2009, 11:19 AM
I wouldn't mind at all if mine were archived on the site somewhere.
I had a load of texture photos I would love to contribute too, most would need some editing for specific uses but still :)

OnlineRender
09-12-2009, 03:51 PM
How many people do you reckon download the demo and give up ?,always nice to mess around with something.

starbase1
09-14-2009, 02:50 AM
Well if links are OK, (and why not!), here's a link to my downloads page:
http://www.starbase1.co.uk/downloads.htm

Where you will find a fair bit of space stuff and others, including a textured set of V2 rockets, a Scout rocket, normal mapped Mars, Sputnik 1, some particle scenes, volumetric lights as nebulae, a glassy button builder, a galaspere (!), RD701 rocket engine and others.

Nick

R.Feeney
09-14-2009, 02:55 AM
Thanks Nick

starbase1
09-14-2009, 04:12 AM
You know, it would also be cool to gather up some of the surfaces from these, and make them available separately - perhaps through Preset Central? Certainly many surfaces in the sample images look neat!

colkai
09-14-2009, 05:37 AM
You know, it would also be cool to gather up some of the surfaces from these, and make them available separately - perhaps through Preset Central? Certainly many surfaces in the sample images look neat!

I'd had the same thought, some lovely surfaces, though some I'd guess are scene dependant as the environment has a lot to do with the look.

starbase1
09-14-2009, 05:48 AM
Well, maybe we can ask now, while the number of donors is small:

Does anyone object to surfaces being extracted from their objects, and passed on via Preset Central?

Mr Feeney? As the biggest contributor by a mile, I guess what you say is most important!

JohnMarchant
09-14-2009, 10:18 AM
Thanks alot everyone for your generosity

R.Feeney
09-14-2009, 03:54 PM
Well, maybe we can ask now, while the number of donors is small:

Does anyone object to surfaces being extracted from their objects, and passed on via Preset Central?

Mr Feeney? As the biggest contributor by a mile, I guess what you say is most important!

As colkai said a lot of them are scene dependant but I will certainly have a look at extracting some for preset central. Good Idea:thumbsup:
And call me Richard

Thanks alot everyone for your generosity
On my own behalf you are most welcome :)

There is a link from the Newtek newsletter to this thread in an article about a year of the Speed Modeling Challenges :lwicon:

R.Feeney
09-15-2009, 12:46 PM
Well I havethe first of the presets uploaded to preset central.
This will take some time, the stdScene takes a good while to render on my creaking old machine. But I will get there eventualy.
I just added an extra 2gb memory and a new graphics card which should make things easier.

More models from tomorrow 3 or 4 new ones.

R.Feeney
09-16-2009, 05:02 AM
http://forums.newtek.com/attachment.php?attachmentid=76559&d=1251243767
From the one year on challenge. A Sailing boat

R.Feeney
09-16-2009, 05:15 AM
http://forums.newtek.com/attachment.php?attachmentid=76671&d=1251490840
From Let there be light...well a light :D

Crossfire
09-16-2009, 09:20 AM
Well if links are OK, (and why not!), here's a link to my downloads page:
http://www.starbase1.co.uk/downloads.htm

Where you will find a fair bit of space stuff and others, including a textured set of V2 rockets, a Scout rocket, normal mapped Mars, Sputnik 1, some particle scenes, volumetric lights as nebulae, a glassy button builder, a galaspere (!), RD701 rocket engine and others.

Nick

Thanks! I tried using the camera preset you had set-up for the quicktime VR and was running into some issues that I am unfamiliar with. If you could, explain to me the process you usually use for this. I have an upcoming job here and the client is interested in something like this. I was originally going to use a different program but if I can accomplish this in lightwave alone that would be awesome.

I copied the file into my presets folder but hen I open the properties panel for the advanced camera I don't see and option to import a preset?

I just want to get a general idea of the process you normally follow.:help:


R.Feeney - you are the man!:thumbsup:

-EsHrA-
09-16-2009, 10:00 AM
excellent models richard! cheers! :)

mlon

starbase1
09-16-2009, 11:55 AM
Thanks! I tried using the camera preset you had set-up for the quicktime VR and was running into some issues that I am unfamiliar with. If you could, explain to me the process you usually use for this. I have an upcoming job here and the client is interested in something like this. I was originally going to use a different program but if I can accomplish this in lightwave alone that would be awesome.

I copied the file into my presets folder but hen I open the properties panel for the advanced camera I don't see and option to import a preset?

I just want to get a general idea of the process you normally follow.:help:


R.Feeney - you are the man!:thumbsup:

Ah! I blame newtek for that, they broke the support for camera presets,round about the start of V9...

Go to cameras, select advanced cameras, set the horizontal field of view (FoV) to Cylinder, 360, and the vertical to same as horizontal.

Nick

Crossfire
09-16-2009, 01:13 PM
Ah! I blame newtek for that, they broke the support for camera presets,round about the start of V9...

Go to cameras, select advanced cameras, set the horizontal field of view (FoV) to Cylinder, 360, and the vertical to same as horizontal.

Nick

Thanks a bunch!:thumbsup:

starbase1
09-16-2009, 02:23 PM
Thanks a bunch!:thumbsup:

Let me know if you get stuck, I'll whack together a sceneexample...

Iain
09-16-2009, 02:32 PM
Great thread fellas!
I suggested that we share the models on day one and I think I only ever uploaded a couple of mine....oops!

Here are a few......

Iain
09-16-2009, 02:37 PM
forgot all about some of these

OnlineRender
09-16-2009, 02:38 PM
Minted !

Iain
09-16-2009, 02:41 PM
Even remembered to include a texture with this un :)

R.Feeney
09-16-2009, 02:42 PM
Good man Iain :)

starbase1
09-16-2009, 02:47 PM
Well I havethe first of the presets uploaded to preset central.
This will take some time, the stdScene takes a good while to render on my creaking old machine. But I will get there eventualy.
I just added an extra 2gb memory and a new graphics card which should make things easier.



Richard, I think you will find they are happy to accept any example images. In some cases I deliberately chose my own example, as that showed the effect better...

R.Feeney
09-16-2009, 02:54 PM
Richard, I think you will find they are happy to accept any example images. In some cases I deliberately chose my own example, as that showed the effect better...

Thanks, I have a few more uploaded, just waiting for them to post.
I must have a look at useing some of the pre existing renders for the next few

Crossfire
09-16-2009, 04:03 PM
Thanks All! The Models Are Beautiful. I Will Begin Posting Mines As Well!:thumbsup:

OnlineRender
09-16-2009, 04:08 PM
It should be un-written rule that all speed models have to be shared "Build up a user data bank " (",) .

some off these models are high class , there's nearly enough to build a room . " a slightly strange and twisted room never the less "

R.Feeney
09-16-2009, 04:19 PM
Thanks All! The Models Are Beautiful. I Will Begin Posting Mines As Well!:thumbsup:
Good on ya, looking forward to it.


It should be un-written rule that all speed models have to be shared "Build up a user data bank " (",) .

some off these models are high class , there's nearly enough to build a room . " a slightly strange and twisted room never the less "

Well every challenge asks if you are wiling to share the models.
I just figured that mine were just gathering "digital" dust sitting on the hard drive and it might be some use to gather them all in the one spot.

It may put some folks off participating in the challenge if they think that giving away their work is an implied part of the thread. Or it may not, who knows :D

OnlineRender
09-16-2009, 04:21 PM
depends on how complicated / beast the model is "JUST read the thread rules for challenge LOL " , would be nice though ! imagine it within a year of models , there would be atleast 350 , that's nearly 1 a day , and the speed you people rattle them out ,mind you some models are nice to keep for yourself .

Peace

robert_Lavigne
09-16-2009, 10:42 PM
Here's my contribution to the cause. Hopefully I'll be able to get back at the speed modeling soon. School's been keeping me busy.

R.Feeney
09-17-2009, 06:21 AM
Thanks for sharing Robert :)

mikala
09-17-2009, 02:39 PM
Thanks to all that have shared here.

R.Feeney
09-17-2009, 03:12 PM
I am a bit stunned that the sailing boat has been downloaded 350 times since yesterday 8~
I hope ye all enjoy it!

mikala
09-17-2009, 03:15 PM
Good things tend to have that happen :)
Hopefully you'll see some renders with your meshes as the stars.

R.Feeney
09-17-2009, 05:49 PM
http://forums.newtek.com/attachment.php?attachmentid=76658&d=1251468060
From the "Let There Be Light" challenge a lighthouse. and one of my photos of galway bay is included as a background.

The water should look a little better than whats in this render which I was never really happy with.

colkai
09-18-2009, 02:35 AM
You Da Man Richard :)

TSpyrison
09-18-2009, 08:41 AM
I love the art deco stuff!

R.Feeney
09-18-2009, 09:54 AM
Thanks guys :D

There is a new Challenge just started
http://www.newtek.com/forums/showthread.php?t=102126
Have a go, it can be great fun

chco2
09-18-2009, 12:20 PM
Was informed through Twitter about this :)
Would you guys mind if I post them available for download at my archive site (Benelux Lightwave Resource?). The site is not actively used by me anymore, but still get 2 or three subscribtions a week of people searching through the archives.
Full credits will be made of course :)

R.Feeney
09-18-2009, 01:26 PM
Was informed through Twitter about this :)
Would you guys mind if I post them available for download at my archive site (Benelux Lightwave Resource?). The site is not actively used by me anymore, but still get 2 or three subscribtions a week of people searching through the archives.
Full credits will be made of course :)

I have no problem with it but I can only speak for myself :)
A link back to this thread too would be appreciated.

chco2
09-18-2009, 01:31 PM
Allright, great! Thanks! And I'll make sure all the correct linkbacks and credits are there!


I have no problem with it but I can only speak for myself :)
A link back to this thread too would be appreciated.

EmperorPete
09-18-2009, 04:02 PM
This thread is amazing. Thank you so much for all this guys, it'll be fascinating to look at how you model (and especially texture) things!

caesar
09-18-2009, 07:27 PM
Sweeeet!!!!

OnlineRender
09-19-2009, 05:47 AM
lol must be catching alot of attention even AD die-hards are talking about it , and so they should be ,some damn nice models , i'll post my calculator tonight ,since it was my first speedmodel ,may come in handy 4 someone ,edit :now i need to keep an eye on polycount .....hmmmmmmmmmm

R.Feeney
09-19-2009, 05:51 AM
Thanks guys again


lol must be catching alot of attention even AD die-hards are talking about it , and so they should be ,some damn nice models , i'll post my calculator tonight ,since it was my first speedmodel ,may come in handy 4 someone ,edit :now i need to keep an eye on polycount .....hmmmmmmmmmm

Where was this? this has been mentioned on the Lightwave facebook page and their twitter stream in the last couple of days
Good man, the more the better.

Kuzey
09-20-2009, 02:49 AM
I'll add a few more this week as well.

This thread should be a sticky :)

Kuzey

IMI
09-20-2009, 06:44 AM
You guys are awesome for making all this amazing stuff available. :thumbsup:

I'll add my meager contribution - the only model I made for these challenges (that I can remember) that I thought turned out decent - my ceiling fan.
I can't even remember which challenge it was for now. ;)

R.Feeney
09-20-2009, 07:47 AM
Well done IMI that makes for 99 models on this thread so far and nearly 8000 downloads.

AdamAvenali
09-20-2009, 08:41 AM
after looking back, this one is really the only one i feel is up to the quality of the others here, enjoy! :thumbsup:

AdamAvenali
09-20-2009, 08:47 AM
and another...

R.Feeney
09-20-2009, 04:04 PM
Thanks Adam:thumbsup:
http://forums.newtek.com/attachment.php?attachmentid=75856&d=1249041212
From the Life challenge and complete with several hand painted textures and by that I don't mean I took out the paintbrushes and stretched canvas.
But It was GIMPed.
Anyway. Such as it is, a common garden snail

sublimationman
09-20-2009, 10:24 PM
Richard, just found this thread. Wanted to thank you. I can model pretty well but really learning a lot about surfacing from your examples. I suck at surfacing :-)

DBMiller
09-21-2009, 06:36 AM
Why aren't these on the gallery page? Most of these are as good as (and better than) anything I've seen on any other site. Show off what can be done quickly in Lightwave.:lwicon:

R.Feeney
09-21-2009, 07:28 AM
http://forums.newtek.com/attachment.php?attachmentid=72927&d=1240932712
From the vehicle challenge.
Didn't get it quite finished, but I thought it had some nice shapes going on.
It was a 120 min challenge, really not enough for a car I think :hey:


Why aren't these on the gallery page?
I never thought they were really gallery material, most were just 60 min or 120 min for a few.
I am prepared to reconsider though :D

R.Feeney
09-21-2009, 07:40 AM
http://forums.newtek.com/attachment.php?attachmentid=73898&d=1243588169

The models and scene should be attached in the zip. I left out the hdr image but a version of it can be downloaded over here
http://www.debevec.org/probes/
its the one of The Uffizi Gallery.
A chess set from the Board games challenge
I think it was RollerJesus who made a print of this one as a present for a friend of his who is big into chess

starbase1
09-21-2009, 09:58 AM
Was informed through Twitter about this :)
Would you guys mind if I post them available for download at my archive site (Benelux Lightwave Resource?). The site is not actively used by me anymore, but still get 2 or three subscribtions a week of people searching through the archives.
Full credits will be made of course :)

I do not want copies taken from my web pages, though you are welcome to link to the page (not directly to the files).

Nick

chco2
09-21-2009, 01:00 PM
Hi Nick,

The idea was to store the models posted here. Not from anywhere else.

Cheers,
Charly


I do not want copies taken from my web pages, though you are welcome to link to the page (not directly to the files).

Nick

starbase1
09-21-2009, 02:07 PM
Anyway, here's a local one to the thread for all to do with as you please...

Volumetric light set up to look like a rocket engine firing in a vacuum. Three colourings.

R.Feeney
09-22-2009, 03:34 AM
Thanks Nick:thumbsup:

RollerJesus
09-22-2009, 07:41 AM
http://forums.newtek.com/attachment.php?attachmentid=73898&d=1243588169

The models and scene should be attached in the zip. I left out the hdr image but a version of it can be downloaded over here
http://www.debevec.org/probes/
its the one of The Uffizi Gallery.
A chess set from the Board games challenge
I think it was RollerJesus who made a print of this one as a present for a friend of his who is big into chess

That was me, perfect gift for a chess wizard (http://www.chesswizards.com/). :D

R.Feeney
09-24-2009, 01:24 PM
http://forums.newtek.com/attachment.php?attachmentid=77687&d=1253819166
From this weeks challenge "Camping" (http://forums.newtek.com/showthread.php?p=929916)
A Camping stove and pots.

Why not come over and join the fun.

chco2
09-24-2009, 05:05 PM
Simple, yet elegant and within a hour. Nice!

R.Feeney
09-24-2009, 05:13 PM
Thanks, I am not sure if I made it in the hour this time. Forgot to check the clock :)

OnlineRender
09-24-2009, 05:21 PM
well just say it was 59minutes and 59 secs , since you uploaded it straight away :P

IMI
09-24-2009, 11:24 PM
The models and scene should be attached in the zip. I left out the hdr image but a version of it can be downloaded over here
http://www.debevec.org/probes/
its the one of The Uffizi Gallery.
A chess set from the Board games challenge
I think it was RollerJesus who made a print of this one as a present for a friend of his who is big into chess

Once again, great stuff, R.Feeney! :thumbsup:

Thanks also for the link.
How on earth are those vertical cross HDRI's supposed to be used as a background? Mapped to the inside of an inverted cube?
Something else? Know of any information/tutorials on how to use them?
I'm getting 404 errors on some of those links to info.

R.Feeney
09-26-2009, 05:03 AM
I think some other renders allow the use of Cubic Environment mapping which uses the cross type HDRI.

-EsHrA-
09-26-2009, 08:14 AM
thanks Richard and others for sharing!


here's my quick contribution... :)

http://img16.imageshack.us/img16/3471/2houses.jpg


mlon

R.Feeney
09-26-2009, 08:18 AM
That looks great, thanks for joining in :)

bobbatt
09-26-2009, 10:16 AM
I appreciate your generosity.
Thank you,
Bob Batt

thekho
09-29-2009, 02:56 PM
Great stuffs, R.Feeny and others! Thanks all for sharing!

Also i give my things (object, texture and scenes) away! cos the LW community has helped me over the years!

Here's my scenes from Speed Modelling Challenge #16-Children's Toys! Enjoy it :)

R.Feeney
09-29-2009, 02:57 PM
I appreciate your generosity.
Thank you,
Bob Batt

You are very welcome Bob and thanks for taking the time to comment. Thats what makes it worthwhile for me :)
http://forums.newtek.com/attachment.php?attachmentid=77757&d=1254007811
Just the model this time, there was no real scene to speak off anyway.
A folding shovel from the camping challenge.

R.Feeney
09-29-2009, 02:58 PM
Thanks thekho, very good of you to join in:thumbsup:

thekho
09-29-2009, 03:00 PM
Here's another scenes from Speed Modelling Challenge #18-Things Under the Sea! Enjoy it :)

R.Feeney
10-01-2009, 05:45 AM
A new challenge has started, Optics are this weeks challenge
http://www.newtek.com/forums/showthread.php?t=102460
It would be great if some of you would take part, things have been a bit quite in the last few challenges and some new blood is needed to keep these going.
So please think of participating

LW_jackn
10-04-2009, 10:40 AM
Hey Richard,

First of all thanks! ;)

Second, are your objects for LW 9x only or?

Cheers!

R.Feeney
10-04-2009, 11:01 AM
Thanks jack,
I dont have an earlier version installed anymore, so I cant check but -They were all built using versions of 9 And I think the majority use the new materials from the 9 series.
If there are any you want exported to an earlier version, I would be happy to help out with that.

R.Feeney
10-05-2009, 04:54 AM
http://forums.newtek.com/attachment.php?attachmentid=72784&d=1240526534
From the vehicle race challenge a flyer sort of thing. No scene, just the object.

OnlineRender
10-05-2009, 12:42 PM
any chance we can sticky this ?

OnlineRender
10-05-2009, 01:17 PM
CHEERS R- done thought as much
peace

R.Feeney
10-05-2009, 02:29 PM
Thanks for joining in, unfortunately you need a redistribution licence to distribute the models from facegen.
http://www.facegen.com/rd_license.htm

LAV
10-05-2009, 03:30 PM
Many thanks, man. I -need- the airship!
Thanks for sharing ;)

R.Feeney
10-05-2009, 03:50 PM
You are very welcome.
I would love to see what you do with it.

Kuzey
10-06-2009, 04:13 PM
Ok...it took longer then I expected, not having an internet connection for a week or so and all that :D

Grab it from my blog..if you wish.

Kuzey

Oedo 808
10-06-2009, 04:49 PM
Richard, what a great idea! Man, you have so many great models. I think there's a couple of mine that might be worth chucking into the mix.

Excellent job with giving these free models away, really good of you. :thumbsup::thumbsup:

I think scene dissection is probably what I'll be after, still never used HDRI!

R.Feeney
10-11-2009, 12:14 PM
Thanks again Kuzey, Beautiful model.

Looking forward to seeing what you add to the mix Oedo 808

R.Feeney
10-14-2009, 12:46 PM
I am working on getting some more content finished for posting on here. But it may be a few weeks, life is getting in the way again :D

colkai
10-15-2009, 02:17 AM
Hear that only too well Richard. :)

Eroneouse
10-17-2009, 02:40 PM
Thank you so so much all you happy contributors I have DL just about every model and scene on these 14 pages. I just had lightwave delivered yesterday so I was looking for free models to disect as a learning aid and did I need to go any further than newteks own fantastic lightwave community... Nope. When I get some models built myself I shall definately post some of them on here for others to have and use so thanks again guys n gals :D

:thumbsup:

R.Feeney
10-17-2009, 07:24 PM
You are very welcome Eroneouse. :)

JamesCurtis
10-25-2009, 08:51 PM
Any new models coming?

Iain
10-26-2009, 02:48 AM
Model and scene attached.

Iain
10-26-2009, 02:55 AM
Model and quickly thrown together textures.....

R.Feeney
10-26-2009, 04:57 AM
Good man Iain. Stunning work.
I have a few more to add and I`ll get there sooner or later :)

probiner
11-03-2009, 09:15 AM
Model and quickly thrown together textures.....

freaking awsome

actually looks like a laugh to photo-realistic CG =)

R.Feeney
11-03-2009, 10:07 AM
http://forums.newtek.com/attachment.php?attachmentid=78064&d=1254788028
From the Optics challenge

R.Feeney
11-03-2009, 10:11 AM
http://forums.newtek.com/attachment.php?attachmentid=77918&d=1254438864
And a spy glass from the optics challenge too

R.Feeney
11-03-2009, 10:51 AM
http://forums.newtek.com/attachment.php?attachmentid=78242&d=1255284075
From the architecture challenge a bridge

R.Feeney
11-03-2009, 11:01 AM
http://forums.newtek.com/attachment.php?attachmentid=78209&d=1255192693
From the architecture challenge a massively inaccurate roman temple.
The reason its such a large file is that for reasons that escape me right now I built all the roof tiles.

R.Feeney
11-04-2009, 05:36 AM
http://forums.newtek.com/attachment.php?attachmentid=78320&d=1255456035
From the architecture challenge a hall and stairs. Honestly there is more detail to it than what the render might suggest.

R.Feeney
11-04-2009, 05:38 AM
http://forums.newtek.com/attachment.php?attachmentid=78352&d=1255543622
And another type of stairs

chco2
11-04-2009, 06:58 AM
Not my best work, but something I just finished for an animation.
See also this Youtube link (http://www.youtube.com/watch?v=TUniZfCYPz8)
The object is included as well as the Scene file with the animation shown in the Youtube movie.

Glendalough
11-04-2009, 07:14 PM
http://forums.newtek.com/attachment.php?attachmentid=78320&d=1255456035
From the architecture challenge a hall and stairs. Honestly there is more detail to it than what the render might suggest.

This is really wonderful, very inspiring! Took the liberty to do a version of it in Luxrender.

chco2
11-05-2009, 08:36 AM
Phew.. Finally got around to archiving this lot :)
More info here : http://2lk.nl/qt
Gallery of all available downloads here : http://2lk.nl/qv
Archives here : http://2lk.nl/qw

These last two links only work when registered (sorry).
Register here : http://2lk.nl/qx

OnlineRender
11-05-2009, 08:44 AM
stunning models !

Riff_Masteroff
11-06-2009, 08:56 AM
. . .And another type of stairs

Innovative! A variation of this model should be built in reality. I have long thought that others are better at architectural design than architects.

starbase1
11-06-2009, 09:41 AM
RF, are you OK for the collection to be mirrored? Any T's and C's

R.Feeney
11-06-2009, 09:59 AM
Not my best work, but something I just finished for an animation.
See also this Youtube link (http://www.youtube.com/watch?v=TUniZfCYPz8)
The object is included as well as the Scene file with the animation shown in the Youtube movie.

Thanks for joining in and for the mirror:thumbsup:

stunning models !
Thanks:)


Innovative! A variation of this model should be built in reality. I have long thought that others are better at architectural design than architects.
I`m afraid its not my original thought.
I built this from a memory of a photo I saw. I think it was of a museum in New York. I doubt if it is very accurate, I didn't have the photo to refer to anymore.


RF, are you OK for the collection to be mirrored? Any T's and C's
I can only speak for the models that I posted:
The main thing is not to be making any money from them by selling them or any other commercialization of them:D
If you stick my name up with the models if you are mirroring them it would make me happy.
A link back here or to my blog would be appreciated too.
I would like to know where they are posted as well.
Apart from that, Go for it.:thumbsup:

R.Feeney
11-06-2009, 10:00 AM
This is really wonderful, very inspiring! Took the liberty to do a version of it in Luxrender.

Nice work, much clearer than my render:thumbsup:

R.Feeney
11-06-2009, 10:02 AM
http://forums.newtek.com/attachment.php?attachmentid=78472&d=1255828803
Arr its a pirates life for me!!
A cutlass from the pirate challenge

R.Feeney
11-06-2009, 10:07 AM
http://forums.newtek.com/attachment.php?attachmentid=78393&d=1255635670
Also from the same challenge a cannon. Also used in my Ghost ship (http://www.newtek.com/forums/showthread.php?t=103090) which still needs alot of work
The background is from Little Killary on the west coast of Ireland

chco2
11-06-2009, 10:32 AM
No problem. Should be thanking you and everyone for creating such a valuable archive of models. I have included all the models, except starbase's as he mentioned this specifically. All original authors are mentioned as well as a link back to this thread with every model. If specifics were mentioned with the model it has been included to.

btw. The wooden castle has actually been built :) I'm looking forward to the speedchallenge, waiting for the new subject :)


Thanks for joining in and for the mirror:thumbsup:

R.Feeney
11-07-2009, 06:10 AM
http://forums.newtek.com/attachment.php?attachmentid=75482&d=1248221200
From the Scifi icons challenge - Blakes 7 _The Liberator. It may not look exactly like this, I think I made some minor changes to it after the challenge was over.

starbase1
11-08-2009, 08:19 AM
And a brand new contribution from me, the Trailblazer II reentry research rocket.

2 versions, one with realistic markings, and one that looks nice!

starbase1
11-08-2009, 08:22 AM
I can only speak for the models that I posted:
The main thing is not to be making any money from them by selling them or any other commercialization of them:D
If you stick my name up with the models if you are mirroring them it would make me happy.
A link back here or to my blog would be appreciated too.
I would like to know where they are posted as well.
Apart from that, Go for it.:thumbsup:

I agree completely - I think it might help if people donating include a short readme.txt file in the zip - that way everyone will know, even as the files get passed around.

Romizer
11-10-2009, 10:52 AM
GREAT STUFF!

COOL DONE!

Thanks!

Kuzey
11-16-2009, 05:43 PM
Another one by me...grab it off the blog :D

Kuzey

colkai
11-26-2009, 03:16 AM
Here's my rowing machine, as normal, I removed the SiBL images to save on space.
The images were from the SiBL Collection "empty_room"
The render requires the use of the TB_Edge shader plugin, (it's free though :) ).

JamesCurtis
11-28-2009, 12:09 AM
Thought I'd give away this special NewTek brand "Can of Beans" from the Camping Essentials Modeling Challenge from awhile back.

JamesCurtis
12-04-2009, 03:38 PM
No other submissions here?

R.Feeney
12-05-2009, 09:25 AM
Once I have the time, health and energy, I`m sure Ill have a few more to add.

JamesCurtis
12-05-2009, 03:16 PM
Mr. Feeney,

I very much appreciate your contributions and you've been more than generous. That's why I donated my NT Can of Beans. I intend on donating the other two items I created for the Speed Modeling Challenges at some time soon as well.

BTW, I was actually refering to others that participated in the challenge but have not posted or donated models and scenes here as yet.

Definitely a treasure trove of things already in here!!

R.Feeney
12-21-2009, 06:01 AM
Ear This
http://forums.newtek.com/attachment.php?attachmentid=80460&stc=1&d=1261400368
An ear, including all the steps from the anigif
This was not from a speed model challenge, just some practice.

R.Feeney
12-21-2009, 06:08 AM
http://forums.newtek.com/attachment.php?attachmentid=80463&stc=1&d=1261400802
An Eye too.

OnlineRender
12-21-2009, 07:28 AM
Love your polyflow workflow (",) excellent work dude ,glad too see you back !

Eroneouse
12-21-2009, 11:15 AM
No other submissions here?

I intend to add some at some point soonish but currently folk would not want my meshes as they are very unoptimised and a little messy here and there, add in inaccurate textureing and lighting and you can see why I would rather submit something worth haveing rather than the quick hashes I am currently playing around with. Great resource and one I look forward to adding to when my own models can at least compare with whats already offered.
:thumbsup:

R.Feeney
12-22-2009, 04:57 PM
Love your polyflow workflow (",) excellent work dude ,glad too see you back !

Thanks, not quite back yet these are a couple of old ones.:thumbsup:

Ty Catt
12-30-2009, 02:04 PM
WOW!

Totally cool of you to share all of these!

I needed to create two of these (Justice Scales and Cutting Torch) earlier this year.

Put my versions to shame! :o

Excellent Work, Thank you!

Ty

colkai
12-31-2009, 03:31 AM
I'd encourage you to get involved with the challenges, I think it's fair to say many of us have learned a great deal from the process. :)

marcosmr
01-08-2010, 02:57 AM
Hi,
I would like to contribute, modestly, with any object created by my some time ago. I hope you enjoy it. Thank you
Marcosmr