Results 1 to 2 of 2

Thread: Mini AE 5-1 Aux audio routing

  1. #1
    2005 NewTek Demo Guru
    Join Date
    Mar 2003
    Location
    Huntsville, Al
    Posts
    265

    Mini AE 5-1 Aux audio routing

    Ok, so on an HDMI Mini AE 5-1, does anyone know if the 1/4" analog outputs are always tied to "Mix 1" (which I believe would be the same audio embedded on HDMI output 1), or if those analog outputs can be assigned? In a perfect world, I need the embedded audio on HDMI output 1 to have the main mix audio, and have the ability to change the the analog output to an alternative mix. I'm just not sure that can be done if they are "tied" together.

    thanks
    Jon
    Jonathan Crowe
    ETV Engineer
    www.etvhuntsville.com

  2. #2
    2005 NewTek Demo Guru
    Join Date
    Mar 2003
    Location
    Huntsville, Al
    Posts
    265
    From the user manual:

    Analog Outputs 1 and 2 (note that Output 2 is not a TriCaster Mini or Mini SDI feature) are permanently assigned to Master, and Aux 1 respectively. In contrast, digital (or ‘embedded’) outputs are configurable in the Hardware Configuration panel.
    So, the 1/4" analog audio outputs are always locked to "Master". With a couple of Blackmagic adapters, I can go from the Mini's HDMI output 2 to SDI converter & de-embedder to get the analog Aux output I need.

    Jon
    Jonathan Crowe
    ETV Engineer
    www.etvhuntsville.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •