Results 1 to 5 of 5
03-30-2012, 05:46 AM #1
- Join Date
- Jun 2006
Live video overlap in the Virtual Set, the Live video blurs
As this title,does anyone have the same problem?
This is my environment:
Project format：720 x 480i
Live video Input：SD 720 x 480
The problem is that everytime when we use keyed Live video and import the Virtual Set, the Live video blurs.
Please see the attached
03-30-2012, 09:36 AM #2
I don't know if it's the reason, but I'm seeing a very slight down-scaling in the live source ... maybe around .5% or so. that would result in a very slight softening.--
("You've got to ask yourself one question ... 'Do I feel lucky?' Well, do ya, spammer?")
04-01-2012, 11:26 PM #3
- Join Date
- Jun 2006
I used the LiveSets "DemoStudio" Center as default, but always blur
Hi, SBowie & joseburgos
I used the LiveSets "DemoStudio" Center as default,
didn't scale any Video including LIVE Video.
Take a closer shoot size to show the blurs in VirtualSets.
I had try to use the other Sets with default.
The results are all blurs.
If you thought the result was caused by Live video down-scale,
the result is the same with I thought.
Please tell me why Live video had been down-scale in any default LiveSets with default settings?
The other hand, I had test the other TCXD850 & TCXD450 with HD & SD Project with HDcam & SDcam, the blur is always been appeared.
I had used the "Virtual Sets Editor" tool to import Sets PSD, the Live Input A with set 83% scale in PSD.
The Live video could be caused least blur.
I hope Tricaster could fix this issue as soon as possible, or tell Users how to avoid the result.
Thanks your support again,
Needs your suggestion soon.
04-02-2012, 08:21 AM #4
The sets I build and the ones I build for my own use, is all done in HD sessions. In GD session with HD cameras, I don't see blur. I'll try and see if I can make a test using SD camera and confirm.
04-02-2012, 11:09 AM #5
In my opinion, the blur is definitely cause by the slight down-scaling of the camera video. Admittedly, I didn't notice it at all...until really looking closely at the sample images (then re-reading the OP to make sure I wasn't missing something).
I'm pretty confident that if you could get a scaling factor that was exactly 100%, the very slight blur would go away. However, I don't think you could achieve an exact 100% scale factor without creating a LiveSet specifically for the purposes of testing this theory.
To answer the question in the follow-up post, the reason for the down-scale is simply the zoom level that you have chosen. If you were to zoom in a bit, you would come much closer to the 100% scale factor. If you are zoomed in to the maximum allowed for this LiveSet, there is nothing you can do about it.