Major TriCaster STUDIO upgrade and price incentive for December

[Phil Cassell]

NewTek is happy to announce the release of a new upgrade for TriCaster STUDIO. The major features in this upgrade include:
• A 3-camera monitor mode, with dedicated preview monitors for three cameras.
• In 3-camera mode, preview monitor can switch to Waveform / Vectorscope
• A new Edit Text tab lets you create title templates from scratch to add to the existing TriCaster STUDIO Title Templates. The full Character Generator can easily export both Title Templates as well as LiveSet™ backgrounds
• The ability to connect a Y/C input either by 4-pin S-Video or dual BNC
• LiveMatte™ allows for faster setup of simple chroma-keys, and may be used without LiveSet
• Improved video quality and color accuracy throughout TriCaster STUDIO
• New LiveSets

This free update is available to all registered TriCaster STUDIO owners at http://register.newtek.com/ . Log in to your account, and click on the My Downloads link on the upper right side of the page.

January 1st, the price for TriCaster STUDIO in North America increases to $10,995US.
For those of you who haven't yet purchased your TriCaster STUDIO, the current price of $9,995 is effective until December 31st with access to the upgrade at no additional charge.

Visit www.newtek.com/tricaster to buy yours today.

The full details of this upgrade are available here (http://www.newtek.com/news/releases/12-05-07a.html).

Your friends at NewTek

[TappedOut]

This is the Update I have been waiting on!! Great Job guys! I installed tonight with no problems and I love it!

I only wish there was still a way to have all 6 inputs and still have the three previews! But it is definitely a great update!! The Text Editor is off the hook, and I love the new overlay templates as well. Overall a great release!! Thanks and keep up the great work!

[zras]

Hi, I just joined the forum and was wondering if any other folks have upgraded yet and if any problems were found. Thanks, Scott:)

[RaVeN{base}]

I will be doing the upgrade Monday after I complete my morning shows. i will let you all know how it goes. Also looking forward to the LiveSet Generator LightWave Plug-In, I haven't seen it in my downloads yet, but excited.

[TappedOut]

I have downloaded and I have had n problems at all yet! Works like a charm! Great Job!

[CreatvGnius]

I have downloaded and I have had n problems at all yet! Works like a charm! Great Job!

Ditto here! No problems with this new 2.0 upgrade. :thumbsup:
-PeterG

[RaVeN{base}]

Are the new liveset generator lightwave plugins out? I don't see it yet in my downloads. If not it is due this month right?

[SBowie]

No, and - my guess, very probably ...

[zonuna]

NewTek is happy to announce the release of a new upgrade for TriCaster STUDIO. The major features in this upgrade include:

• The ability to connect a Y/C input either by 4-pin S-Video or dual BNC




hi, Can anyone explain how to connect a Y/C input by Dual BNC on TC studio which is explained on the new update.

[Cineman]

Sure zonuna.

I'll kind of run through the whole thing, in case that is part of your question.

It's fairly common to run Y/C on two coax cables for long cable runs, such as our 300 feet. This usual Y/C is four pin (four wire). A coax cable is the equivalent of two wire. One is the center conductor and the second is the metal wrapper. Both are connected to the coaxial connector.

There is a Y/C splitter that splits the four wires (pins as you see them at the connector). to two coax connectors. From this, all the way to the TriCaster STUDIO patch panel you then run the two coaxial cables. The one with the two luminance pin (Y) wires would be attached to the Y connector. I don't think that NewTek has said for the chrominance (C), but there is a norm which carries to the NewTek VT SX-8 and 84. That would be to connect it to the "V" connector on the TC S patch panel.

I am sure that the upgrade manual will cover that part.

Nes Gurley

[zonuna]

Thanks Cineman

You guys are great help

[Edmur]

Hi, I´m trying to upgrade my TCS but the message appears " Tricaster Studio not Installed. Or update previously installed", and the instaltion is finish. What can I do? I´m doing somenthing wrong?

[Edmur]

NewTek is happy to announce the release of a new upgrade for TriCaster STUDIO. The major features in this upgrade include:
• A 3-camera monitor mode, with dedicated preview monitors for three cameras.
• In 3-camera mode, preview monitor can switch to Waveform / Vectorscope
• A new Edit Text tab lets you create title templates from scratch to add to the existing TriCaster STUDIO Title Templates. The full Character Generator can easily export both Title Templates as well as LiveSet™ backgrounds
• The ability to connect a Y/C input either by 4-pin S-Video or dual BNC
• LiveMatte™ allows for faster setup of simple chroma-keys, and may be used without LiveSet
• Improved video quality and color accuracy throughout TriCaster STUDIO
• New LiveSets

This free update is available to all registered TriCaster STUDIO owners at http://register.newtek.com/ . Log in to your account, and click on the My Downloads link on the upper right side of the page.

January 1st, the price for TriCaster STUDIO in North America increases to $10,995US.
For those of you who haven't yet purchased your TriCaster STUDIO, the current price of $9,995 is effective until December 31st with access to the upgrade at no additional charge.

Visit www.newtek.com/tricaster to buy yours today.

The full details of this upgrade are available here (http://www.newtek.com/news/releases/12-05-07a.html).

Your friends at NewTek


Hi, I´m trying to upgrade my TCS but the message appears " Tricaster Studio not Installed. Or update previously installed", and the instaltion is finish. What can I do? I´m doing somenthing wrong?

[Paul Lara]

Hi, I´m trying to upgrade my TCS but the message appears " Tricaster Studio not Installed. Or update previously installed", and the instaltion is finish. What can I do? I´m doing somenthing wrong?

When did you purchase TriCaster STUDIO? The all recent versions have the upgrade software already, which may be why it reports 'update previously installed'.

[Edmur]

We buy after the launching in 2007. In our version is not possible to change to 3 camera mode.

[Edmur]

It Follows the message.

[Gordon]

Did you purchase the upgrade?

See:

http://shop.newtek.com/tricastersoftwareupdates.aspx