< Please Help >

[Henzzz]

dear All...

i need help..

i want to know, the configuration for TALLY LIGHT...

and how to make the tally light cable / connector ??

i use VT4 complete kit and JVC GY HD251 camera + JVC CCU..


please help...

[wvp]

try a search on all the VT forms for "tally light" - I think you will find a post with the info.

[Henzzz]

thanks for the reply...

i already search the forum before posted...

and it make me confuse :D


is it 3,3 volt ? or 5 volt ?? ( i use JVC RM P210 CCU )

should i use additional device (like Tally Light Relay) or i can just wiring and connect it directly ???

what the diference if i connet it directly and use tally light relay ???


thanks in advance

[bbeanan]

man I really don't want to dig that out of my head but the basics...

on the old SX-8 you will need a NPN transistor that in turn triggers a relay. The basic wiring would be out of the Tally Out to a 100ohm resistor to the base (I think) of the transistor. Running 5v dc into the collector (I think??), then from the emitter to the relay and there you go...