Another Guy With A Logo Problem

[robpauza]

Hello,

This is one of the few non-subpatch models I've done. It's sort of a logo/emblem thing to be used on a series of posters and ads.

I can't seem to figure out what's going wrong. Any help would be most welcome. Here's what's going on:
http://users.chartertn.net/robpauza/help.jpg

I've also uploaded the model if anyone want's to take a look.
Click here for Model (http://users.chartertn.net/robpauza/nnhw.lwo)

Thank you,
-Rob

[Bytehawk]

imho

pull the smoothing angle down to about 20 degrees (or even lower).
that way you won't have these smoothing errors

[robpauza]

Bytehawk:

Thanks a ton!!! :) This is a rush project, and you saved my butt.

Next I get to surface it, then design a few posters and newspaper ads to go with it. :eek:

Thanks again.
-Rob

[robpauza]

Here it is by the way: (no surfacing yet)

-Rob

[Bytehawk]

that's a kewl logo