winrtme.exe II

[tecnoponta]

:confused:

I ever wrote about this message error: winrtme.exe. I alread changed my system, mother board, hard disks, all softwares, but my problem´s still there.

when I launch VT2, it show this message: "The Real Time Media Engine Launcher has found a problem and need to be closed" .After that, I don´t have analog inputs and outputs.
I know that many things can cause this message, but I would like some exemples to I try make something new.

tks
Roberto Golla Jr

[Pete Draves]

What is the configuration of your system
Mother bd processors mem etc

Pete

[tecnoponta]

Originally posted by Pete Draves
What is the configuration of your system
Mother bd processors mem etc

Pete

hi Pete, my configuration is:

************************************************** **
General Information
************************************************** **
Product name Intel(R) Desktop Board D875PBZ based system
Board model Genuine Intel(R) D875PBZ system board
OS version Windows* 2000 version 5.0 Service Pack 3 build 2195
OS memory 1,047,276 KB RAM


Processor
************************************************** *************************
Processor Genuine Intel(R) Pentium(R) 4 Processor
Processor speed 3.00 GHz
Bus speed 800 MHz
L1 cache Data Cache 8KB, Execution Trace Cache 12K Micro-ops
L2 cache Advanced Transfer Cache 512 KB
Form factor Socket 478
Stepping 9

************************************************** *************************
System
************************************************** *************************
Physical memory 1,024 MB RAM
Memory speed DDR400
Memory type DDR, Synchronous
Form factor DIMM
BIOS date 04/23/2003
BIOS size 1024 KB
BIOS version P05 (BZ87510A.86A.0026.P05.0304231448)

I hope you can help me.

[Pete Draves]

need basics
Raids and any other boards in system
chipset type

slot the toaster is in (count from agp slot

type of agp card
Pete

[pfrench]

Go into the "drivers" folder and double click newtekrtme.exe until it stays open. Copy/paste its output here.

[tecnoponta]

Originally posted by Pete Draves
need basics
Raids and any other boards in system
chipset type

slot the toaster is in (count from agp slot

type of agp card
Pete

I was using slot 4 but I´ll try to change the slots.....I THINK this is the problem.

tks

[Tinker]

I read a post awhile back and this Error Message refers to the card being bad if you have tried differnt motherboards... I would send the card in for warrenty :)

[Jim_C]

If you are still having problems, do as pfrench said above.
the aliens will get a fix of it.

[tecnoponta]

Hi friends....well I still have the problem, a big problem. I did what pfrench said (I think, double click in rtme.exe and I´ve got it out of the past) but it doesn´t get open.
And about you Tinker, you mean I can´t change motherboards??? I really have tried my card in others systems.....others motherboards. Could my card is out of order becouse of it?? I hope no and I´m still trying to get it alive! :-)

[tecnoponta]

Originally posted by pfrench
Go into the "drivers" folder and double click newtekrtme.exe until it stays open. Copy/paste its output here.


When I am running newtekrtme.exe, the winrtme.exe message error shows and it stops running. I could see some messages running newtekrtme and one told that it doesn´t see the daugther card analog inputs and outpts. What does it mean? Is my daugther card broken??

[Pete Draves]

does it have power applied to the power connector of the daughter card
It looks like the one on the back of the floppydrive

Pete

[tecnoponta]

Originally posted by Pete Draves
does it have power applied to the power connector of the daughter card
It looks like the one on the back of the floppydrive

Pete

yes, the daughter card has power applied. When I take out the cable, the message goes out, but, of course, I don´t have anolog input and outputs.

[Pete Draves]

This is probably a dumb question
does your toaster work with just the pigtails?
audio in 1/8 mini stereo?
I have seen defective daughter cards and defective bobs>

Pete

[tecnoponta]

Originally posted by Pete Draves
This is probably a dumb question
does your toaster work with just the pigtails?
audio in 1/8 mini stereo?
I have seen defective daughter cards and defective bobs>

Pete

I work with BOB, but I´ll try use the pigtails. who knows my BOB´s defective.

[tecnoponta]

well, I think I don´t have a dumb question here.....I work with bob and I have alread tried do it without bob and daughter card, using pigtails and audio in/out 1/8 mini stereo but the error´s still the same, when I turn on my computer the message error - winrtme.exe - shows and I can´t running vt, I can´t run newtekrtme.exe as pfrench told me, I can´t do anything.

[pfrench]

I really can't determine what might be wrong unless I get the output from "newtekrtme.exe"

If you can't run it by double clicking it. Open a "command prompt" and "cd" to the VT3 Drivers directory. Then type:

newtekrtme

it should print out info like...

NewtekRTME Ver 2.0 pfrench
Copyright (c) 1998-2002 NewTek, Inc.
Confidential and Proprietary. Do not distribute.
Initializing...[WSS:4,127]
Reading Config File: "I:\home\pfrench\dev\bin\i386\newtekrtme.cfg"
[cfg:rtme-pool-size 96 MB]
[cfg:rtme-pool-actual-size 96 MB]
[cpubd][cfg:disconnectdelay=16][cfg:vidsynctimeout=250]
[cfg:cgsynctimeout=250][cfg:vidsyncframes=4]
[cfg:programsyncfields=3][cfg:vidsync-aud-prequeue=3]
[cfg:maxpcibandwidth=95MB/s]
[cfg:vid-sync-depth 64][cfg:tbc.threshhold=0x06d][cfg:dve.siz=0,dve.ratio=0]
[cfg:rtme-poolscan=120]
[VladStat:00000000][DS:00E0 0020 0FB1][AVR: 08]
[cfg:gnlk-fpga-ver 23][genlock: rev:03 pcb:00]
[cfg:i2c-delay 10][cfg:i2c-timeout 10000]
[SX-8 r2 on 0 = aa ps:00 fs:01 pv:90 fv:80]
[SDRAM: Refresh 0 RAS 12 CAS 8 NumBanks 4 == 00300000]
[0:127-B][Ver 1 Analog Daughter on 0][1:127-B][7171]
[brev:2,1][cfg:disconnectrow=0][cfg:default-aud-volume=0]
[cfg:v72-gain=0x100][cfg:xlr2panswap=1]
[cfg:bob72trim(4,5,6,7)][cfg:MaxXlr=2]
[cfg:aud-interval 512][cfg:aud-dma-lead 3]
[cfg:audio-delay 7][cfg:aud-sync-depth 32][cfg:aud-mix-pri 6]
[AMTID:1108][AudMixThread:260 = 6]
[cfg:swit-delay 1]
[#processors=1]

[Switcher Build Date: "Sep 9 2003 13:11:25"]
Server Initialization Succeeded!
Driver Version: 00090036
CB: 01e07000 @ 01757000 (512)
FBufs: [29 / 32]
Vlad Version: 00000180
VB: fe900000 @ 08d40000


If I have all of this information I can help. Otherwise it's just blind guessing.

[eon5]

I run newtekrtme.exe but...

cmd only print out this:

NewtekRTME Ver 2.0 pfrench
Copyright (c) 1998-2002 NewTek, Inc.
Confidential and Proprietary. Do not distribute.

:confused: